Dimm Module Removal - NEC DIRECTION L Service Manual

DIMM Module Removal

Remove any optional DIMM modules from the system board as follows.
1. Remove the system access cover and any expansion boards as previously
described.
Press the locking clips at the ends of the socket away from the DIMM memory
2.
module (see Figure 5-9).
Gently rock the module while pulling it up from the socket.
3.
When installing a DIMM module, align the notches on the module with the keys in the
memory socket, insert the module, and press in the plastic locking clips.
Figure 5-9 Removing a DIMM
Disassembly and Reassembly 5-9