Fan Assembly Removal; Dimm Module Removal; Removing The Drive - NEC Direction SP E-Series Reference Manual

Fan Assembly Removal

Remove the fan assembly per the following steps.
1. Remove the system access cover per "Option Installation."
2. At the rear of the system unit, press in on the two locking tabs securing the
assembly to the chassis.
3. Remove the fan by pulling it outward away from the system board.

DIMM Module Removal

Remove any optional DIMM modules from the system board as follows.
1. Remove the system access cover and any expansion boards as previously
described.
2. Press the locking clips at the ends of the socket away from the DIMM
memory module (see the following figure).
3. Gently rock the module while pulling it up from the socket.
5-8 Disassembly and Reassembly

Removing the Drive