Nitsuko 1232 Instruction And Installation Manual page 93

OPERATION:
To activate Call Forward:
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press TRFR key.
4. Dial destination extension number.
5. Dial option code (0-3). (see Note 3)
- One short beep sounds as confirmation.
- One long beep means calls cannot be rerouted to that extension. (TX-Z 824)
- 3 splash tone means calls cannot be rerouted to that extension. (TX-Z 1232/2464)
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Dial destination extension number.
4. Dial option code (0-3). (see Note 3)
5. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data
Dial Plan 1
Dial Plan 2
Note 3: Option codes are as follows:
Call Forward
0 =>
Call Forward
1 =>
Call Forward
2 =>
Call Forward
3 =>
To cancel Call Forward (at originating and destination extension):
<KTS>
1. Press SPK key.
2. Press ICM key. (TX-Z 824/1232/2464 only) (See Note 1)
3. Press TRFR key twice.
4. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code. (see Note 2)
3. Hang up.
Note 1: If Program #75-D is 0 (No tone), skip Step 2. (TX-Z 824/1232/2464)
Note 2:
Program #20-D Data
Dial Plan 1
Dial Plan 2
RELATED SYSTEM DATA:
#28: Unanswered Time
Trunk Incoming Call
Automatic Trunk Access Code for SLT
-
0
1
Immediate
when Busy
when Unanswered
when Busy/Unanswered
Automatic Trunk Access Code for SLT
-
0
1
¾ 4-17 ¾
-
0
9
-
0
9
Dial at Step 2
63
953
053
Dial at Step 2
69
959
059