Nitsuko 1232 Instruction And Installation Manual page 374

To record a Paging Message (Personal Message): (Cont'd)
Display Indication
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
To confirm a Paging Message (Personal Message):
Display Indication
# # S U N # 2 5 #
P L Y . P A G E # M E S S A G E
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
Features on Transfer
6. Hang up or press SPK.
1 2 : 0 0 P M
When user hangs up or presses SPK without dial * or #,
*
the recorded message will be saved. When maximum
time of recording (4/8/12/16 sec.) has passed during
record message, timer counting will automatically be
finished and the recorded message will be saved.
(SLT)
1. Lift handset.
2. Dial 7 and 952. (Dial Plan 1) (see Note 2)
2. Dial 0572 (9572). (Dial Plan 2) (see Note 2)
3. Dial *. (Recording start.)
4. Record a message from handset.
5. Dial *. (Recording is finished and Dial Tone may be sent.)
(see Note 3)
6. Hang up.
When user hangs up without dial * or #, the recorded
*
message will be saved. When maximum time of recording
(4/8/12/16 sec.) has passed during record message, timer
counting will automatically be finished and the recorded
message will be saved.
Note 1: When Program #75-D is 0 (No tone), press ICM key
Note 2: When VAU unit is not inserted in the system, Voice
Note 3: If user dials "#" instead of "*", recording contents will
(KTS)
1 2 : 0 0 P M
1. Lift handset or press SPK. (See Note 1)
2. Dial 953. (Playing start.) (see Note 2, 3)
3. Hear a message from handset or built-in speaker.
(see Note 4)
4. Hang up or press SPK.
1 2 : 0 0 P M
¾ 7-3-3-22 ¾
Operation and Information
or
to seize Intercom after lifting handset.
Paths are occupied or Memory area for the Personal
Message is full condition, Busy Tone will be sent.
be canceled and Dial Tone may be sent.
Operation and Information