Nitsuko 1232 Instruction And Installation Manual page 238

Program 93
This program indicates Main ROM & Sub-CPU version for each Unit.
Display Indication
S U B # C P U # V E R S I O N
# # # # # 9 3 - N N
Program 94
This program enables the Caller-ID Table Clear and Initialization feature.
Display Indication
C L E A R # I . D .
# # # # # 9 4 # # # # # # # #
Program 95
This program assigns variable timer of SUB-CPU in main equipment for Single Line telephones.
Display Indication
S U B # C P U # T I M E R S
# # # # # 9 5 - N # # #
NN. Main ROM or Unit number
00 = Main ROM
01 = Sub CPU for TX-Z 308 M.E.
# # # - D D
01-03 = Sub CPU for TX-Z 824 M.E.
01-08 = Sub CPU for TX-Z 1232/2464 M.E.
09 = Sub CPU for VAU Unit(TX-Z 1232/2464)
10 = Sub CPU for 3CIDU Unit(TX-Z 308)
10 = Sub CPU for SMDR Unit(TX-Z 824/2464)
11-13 = Class Package 1-3(Caller-ID Adaptor)
14 = Sub CPU for 3FAXU Unit(TX-Z 308)
DD. Version Number
00 -
(Can not enter any dial.)
Caller ID Table individual clear
# T A B L E
C
N. 1: Hook detect time for SLT
# #
2: Incoming signal guard timer for SLT
- T T T
3: Call abandon detect timer for SLT
*On TX-Z 824/1232/2464, Series No. of
408M/208E/008E/408U/008U units shall be 2.0 or
upwards.
¾ 5-41 ¾
Input Data
Input Data
Input Data
(The time from when the line was cut-off
and to start to detect a next incoming
signal.)
Initial
¾
Initial
—
Initial
(N = 1)
TTT = 080
(N = 2)
TTT = 020
(N = 3)
TTT = 050