Nitsuko 1232 Instruction And Installation Manual page 358

To confirm Left Message(s): (Cont'd)
Display Indication
To transfer Left Message(s):
Display Indication
To erase Left Message(s) individually:
Display Indication
L E A V E # A # M E S S A G E
T O T A L # 0 5 # # # # #
# # S U N # 2 5 #
Features on DISA
(SLT)
1. Lift handset.
2. Dial 7 and *. (Dial Plan 1) (see Note 1, 3, 5)
2. Dial *. (Dial Plan 2) (see Note 1, 3, 5)
Note 1: When Voice Paths are occupied, Busy Tone will be
Note 2: After this operation, user can also confirm message
Note 3: After confirmed message, user can select the
Note 4: When Program #75-D is 0 (No tone), press ICM key
Note 5: When recorded contents has been finished, 1-beep
(KTS, SLT)
1. Listen a left message.
2. Dial # and dial desired extension number.
3. Hang up or press SPK.
(KTS with Display)
1. Press CHECK and dial *.
# 0 1
(For Example: If total 5 messages are left, then first
message will be erased.)
User can select the message to be erased by dialing * or
*
#. (*: Scroll forward, #: Scroll backward)
2. Press HOLD.
1 2 : 0 0 P M
(Message No. 1 is erased.)
(KTS, SLT)
1. Listen a left message.
2. Dial 0. (see Note)
3. Hang up or press SPK.
Note: If messages are erased, Dial Tone may be sent.
¾ 7-3-3-6 ¾
Operation and Information
or
sent.
from handset.
message to be confirmed by dialing * or #.
(*: Scroll forward, #: Scroll backward)
to seize Intercom after lifting handset.
tone (400 Hz, 0.5 sec.) will be sent.
Operation and Information
Operation and Information