Nitsuko 1232 Instruction And Installation Manual page 206

Program 8
This program assigns the following functions for each extension.
Display Indication
S T N # A S S I G N M E N T
# # # # # 0 8 - S T - A B C D E
On the Program #05 and #08-A, can assign the same unused extension ports. However, each port
shall function only for one task on first-in-first-out basis.
Program 9
This program assigns "executive/secretary" pairs for the Executive Call Forward feature. Up to eight
such pairs can be formed. Up to all eight executive extensions can be paired with the same
secretary extension, if desired.
Display Indication
E X E C . C A L L #
# # # # # 0 9 - X #
ST. Extension number (10 - System Max)
#
A. Instrument Type
0: KTS
3: SLT (DTMF)
B. SLT Dial Plan Set
0: Dial Plan 1
C. Internal Page Zone
0: Not include
1 - 4: Page zone 1 - 4
D. Tenant Group
0: Not include
1 - 4: Tenant group 1 - 4
E. Park Hold Group (TX-Z 824/1234/2464)
0: Not include
1 - 4: Park Hold group 1 - 4
* When extension port has been assigned as
DISA in Program #08-A, this port cannot use.
X. Call Forwarding Pair No. (1 - 8)
F W D # # #
(Cannot input dial)
- M S - S C
MS. Executive extension number
(10 - System Max)
SC. Secretary extension number
(10 - System Max)
* A maximum of 8 pairs can be programmed.
¾ 5-9 ¾
Input Data
1: DISA 2: SLT (DP)
1: Dial Plan 2
Input Data
(00: None)
(00: None)
Initial
(ALL)
A: 0
B: 1
C: 1
D: 0
E: 0
Initial
(X = 1-8)
MS: 00
SC: 00