Nitsuko 1232 Instruction And Installation Manual page 347

Message
Message Type
No.
13 Ending Message for Leave
Message
14 Ending Message for Leave
Telephone No.
15 Confirmation Message for
Leave Telephone No.
16 Demanding Message for
Seize the 2'nd Line
17 Continue Message
18 Demanding Message for
Telephone Number (DISA)
19 Trunk line
Message
Table of VAU Message
This message is sent when outside caller finishes for
leaving a message.
Example Message:
Message has been recorded.
This message is sent when outside caller finishes
leaving telephone number.
Example Message:
Telephone number has been recorded.
This message is sent when telephone number is left at
each KTS with display.
Example Message:
You have left telephone number. Please confirm.
This message is sent to be seized the 2nd line by
outside caller on the Trunk-to-Trunk.
For Example Message:
Dial queuing group number or dial "9" then line
number to seize 2nd line.
This is operation message to inform outside caller of
how to continue or finish the conversation on the Trunk-
to-Trunk.
Example Message:
For your information, you hear the long beep tone in
the conversation. You can continue your conversation
by dialing 1 after beep tone. Otherwise, the line will be
cut off.
On the Trunk-to-Trunk feature, this message is sent for
asking to dial the telephone number after seizing 2nd
line.
Example Message:
Please dial telephone number and dial "#".
Busy Condition On the Trunk-to-Trunk, this message is sent when
outside caller cannot seize 2'nd line.
Example Message:
All lines are busy. Dial "#" then "* * * * " to return to
previous condition.
¾ 7-3-1-7 ¾
Description