Nitsuko 1232 Instruction And Installation Manual page 378

To erase recorded General Message(s) individually at originating extension:
(This operation is available only KTS.)
Display Indication
G E N E R A L # M E S S A G E
M W # T O # # 1 2
# # S U N # 2 5 #
To erase all recorded General Messages at originating extension:
Display Indication
Other Features
(KTS with Display)
1. Press CHECK and dial #.
# # # # # # #
(For Example: desired extension No. 12)
* If desired extension has Name, system will indicate the
name for extension number.
User can select the message to be erased by dialing * or
*
#. (*: Scroll forward, #: Scroll backward)
2. Press HOLD.
1 2 : 0 0 P M
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note)
3. Dial *.
4. Dial desired extension number or Hunt Group number.
5. Dial *.
6. Hang up or press SPK.
Note : When Program #75-D is 0 (No tone), skip Step 2.
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note 1)
3. Dial * and 0 and *. (see Note 2)
4. Hang up or press SPK.
(SLT)
1. Lift handset.
2. Dial 69. (Dial Plan 1) (see Note 2, 3)
2. Dial 059 (959). (Dial Plan 2) (see Note 2, 3)
3. Hang up.
Note 1: When Program #75-D is 0 (No tone), skip Step 2.
Note 2: This operation is a same canceling operation as
Note 3: When messages are erased, Dial Tone may be sent.
¾ 7-3-3-26 ¾
Operation and Information
Operation and Information
or
Message Waiting, Intercom Callback, Call Forward,
Remind Call on SLT, and Do Not Disturb (DND)
features. When this operation has been done, all the
features which had been set will be canceled, and
MW lamp/Indicator will be go off.