Nitsuko 1232 Instruction And Installation Manual page 311

(2) To change the current information by searching the caller's Name (Cont'd)
Display Indication
B I N # N O . 0 1 2
A B C # C O R P .
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
(3) To delete the current information by searching the caller's Name
Display Indication
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
S E A R C H # N A M E
S E A R C H # N A M E
N I T S U K O # # # # # # # # #
0 4 4 8 1 1 1 1 1 1
N I T S U K O # C O R P .
0 4 4 8 1 3 7 1 0 1
N I T S U K O # O V E R S E A
S E A R C H # N A M E
L I S T # E N D # # # # # # # #
Caller-ID Table
9. Input new Name. (for example: ABC CORP.)
# # # # # #
* If the Caller's Name is not necessary to change, this
# # # # # # # operation shall be skipped.
10. Press HOLD key. (entry completed)
1 2 : 0 0 P M
* Return to the idle condition.
(Caller-ID information has already stored to the table.)
1 2 : 0 0 P M
1. Press OPAC key. (On Hook condition)
# # # #
2. Dial 94. (search the name)
3. Press Caller's Name (one digit to 10 digits from ahead)
# # # #
for search.
* If the Name input has error, One-Touch key 4 (Space),
One Touch key 5 (Delete a character) and One Touch
key 6 (delete all characters) shall be used for change the
name.
4. Press HOLD key.
# # # # # #
* The corresponding data shall be displayed.
# # #
5. Press # key (search the forward information) or * key
# # # # # #
(search the Backward information).
* If the information is not in table, the indication is as
# # # #
shown;
¾ 7-1-28 ¾
Operation and Information
Operation and Information