Nitsuko 1232 Instruction And Installation Manual page 377

To record and send a General Message: (Cont'd)
Display Indication
To confirm General Message(s) at originating extension:
(This feature is available only KTS with Display.)
Display Indication
G E N E R A L # M E S S A G E
M W # T O # # 1 2
# # S U N # 2 5 #
P L Y . G N R L . M E S S A G E
Other Features
(SLT)
1. Lift handset.
2. Dial 7 and 940. (Dial Plan 1) (see Note 2)
2. Dial 050 (950). (Dial Plan 2) (see Note 2)
3. Dial desired extension number (10 - 79/100 - 799) or
desired Hunt Group number (00 -04).
4. Dial *. (Recording start.)
5. Record a message from handset.
6. Dial *. (Recording finish and Dial Tone may be sent.)
(see Note 3)
7. Hang up.
When user hangs up without dialing * or #, the recorded
*
message will be saved. When 16 sec. Has passed during
message recording, timer counting will automatically be
finished and the recorded message will be saved.
Note 1: When Program #75-D is 0 (No tone), press ICM key
Note 2: When VAU unit is not inserted in the system, Voice
Note 3: If user dials "#" instead of "*", recording contents will
(KTS with Display)
1. Press CHECK and dial #.
# # # # # # #
(For Example: desired extension No. 12)
* If desired extension has Name, system will indicate the
name for extension number.
User can select the message to be confirmed by dialing *
*
or #.
(*: Scroll forward, #: Scroll backward)
2. Press ICM. (Playback message.)
1 2 : 0 0 P M
* When Voice Paths are occupied, Busy Tone will be sent.
* After this operation, user can confirm a General Message
from handset.
* When recorded contents has been finished, 1-beep tone
(400 Hz, 0.5 sec.) will be sent.
¾ 7-3-3-25 ¾
Operation and Information
or
to seize Intercom after lifting handset.
Paths are occupied or Memory area for the Personal
Message is full condition, Busy Tone will be sent.
be canceled and Dial Tone may be sent.
Operation and Information