Nitsuko 1232 Instruction And Installation Manual page 373

To confirm a Transfer Message (Personal Message):
Display Indication
# # S U N # 2 5 #
P L Y . T R F R . M E S S A G E
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
To record a Paging Message (Personal Message):
(This operation requires that extension is set the Meet-Me Paging Transfer Mode and recorded a
Meet-Me Paging Transfer Message.)
Display Indication
# # S U N # 2 5 #
R E C . P A G E # M E S S A G E
0 0 : 0 0 : 0 0 # 1 2 : 0 0 P M
R E C . P A G E # M E S S A G E
0 0 : 0 0 : 0 6 # 1 2 : 0 0 P M
R E C . P A G E # M E S S A G E
Features on Transfer
(KTS)
1 2 : 0 0 P M
1. Lift handset or press SPK. (See Note 1)
2. Dial 951. (Playing start.) (see Note 2, 3)
3. Hear a message from handset or built-in speaker.
(see Note 4)
4. Hang up or press SPK.
1 2 : 0 0 P M
(SLT)
1. Lift handset.
2. Dial 7 and 951. (Dial Plan 1) (see Note 2, 3)
2. Dial 0571 (9571). (Dial Plan 2) (see Note 2, 3)
3. Hear a message from handset. (see Note 4)
4. Hang up.
Note 1: When Program #75-D is 0 (No tone), press ICM key
Note 2: When VAU unit is not inserted in the system or Voice
Note 3: When Personal Message is not recorded, Dial Tone
Note 4: When recorded contents has been finished, 1-beep
(KTS)
1 2 : 0 0 P M
1. Lift handset or press SPK. (See Note 1)
2. Dial 952. (see Note 2)
3. Dial *. (Recording and timer counting start.)
4. Record a message from handset or MIC.
5. Dial *. (Recording and timer counting finish.)
(For Example: Recording time is 6 sec.)
(see Note 3)
¾ 7-3-3-21 ¾
Operation and Information
or
to seize Intercom after lifting handset.
Paths are occupied, Busy Tone will be sent.
may be sent.
tone (400 Hz, 0.5 sec.) will be sent.
Operation and Information