Nitsuko 1232 Instruction And Installation Manual page 304

(2) To delete the current information (Cont'd)
Display Indication
B I N # N O . 0 0 1
# # # # # # 0 4 4 8 1 1 1 1 1 1
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
B I N # N O . 0 0 1
B I N # N O . # # # # # # # # #
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
(3) To make the outgoing call by using Bin Number
Display Indication
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
B I N # N O . # # # # # # # # #
B I N # N O . 0 0 1
B I N # N O . 0 0 1
# # # # # # 0 4 4 8 1 1 1 1 1 1
Caller-ID Table
4. Press * key.
# # # # # #
*
*
*
*
1 2 : 0 0 P M
5. Press OPAC key.
# # # # # #
*
6. Press * key. (delete completed)
*
7. Press CLEAR key. (operation finished)
1 2 : 0 0 P M
(Caller-ID information has already stored to the table.)
1 2 : 0 0 P M
1. Press OPAC key. (On-Hook condition)
2. Dial 91.
3. Dial 001. (up to 100)
# # # # # #
4. Press Line key or Loop key.
# # # # # #
*
*
¾ 7-1-21 ¾
Operation and Information
(displayed current information)
If wrong Bin number is entered, the display shall return to
input mode for Bin number.
If a Telephone Number is stored in Table, it shall be
displayed in lower column.
If a Telephone Number is not stored in Table, the lower
column shall be displayed as "INPUT TEL NO.".
If KTS is not allowed to edit (#61-C) or other KTS is
storing information in same time, Error Tone shall be
heard and return to the idle condition.
(deleted current information)
Lower column shall be blanked.
This is as same condition as at step 2.
Next information can be entered, if necessary.
Operation and Information
(current information is displayed)
Send the dial automatically according to displayed Bin No.
area.
If wrong Bin Number is entered, step-4 shall be canceled.