Nitsuko 1232 Instruction And Installation Manual page 375

Grouphone tx-z series hybrid telephone system
Table of Contents

Advertisement

To confirm a Paging Message (Personal Message): (Cont'd)
Display Indication
To reply to Meet-Me Paging:
Display Indication
RELATED SYSTEM DATA:
#64-A:
Maximum Time of Personal Message
RELATED FEATURES:
Paging
Features on Transfer
(SLT)
1. Lift handset.
2. Dial 7 and 953. (Dial Plan 1) (see Note 2, 3)
or
2. Dial 0573 (9573). (Dial Plan 2) (see Note 2, 3)
3. Hear a message from handset. (see Note 4)
4. Hang up.
Note 1: When Program #75-D is 0 (No tone), press ICM key
to seize Intercom after lifting handset.
Note 2: When VAU unit is not inserted in the system or Voice
Paths are occupied, Busy Tone will be sent.
Note 3: When Personal Message is not recorded, Dial Tone
may be sent.
Note 4: When recorded contents has been finished, 1-beep
tone (400 Hz, 0.5 sec.) will be sent.
(KTS)
1. Lift Handset (do not press SPK) at a phone that received
the page, wait five seconds.
2. Press ICM key. (See Note)
3. Dial announced code (80 - 87), or if calling party is in
same paging zone, dial 88.
(SLT)
1. Lift handset at a phone that received the page, wait five
seconds.
2. Dial 08 (98). (Dial Plan 1, 2)
3. Dial announced code (80 - 87), or if calling party is in
same zone, dial 88.
Note : When Program #75-D is 0 (No tone), skip Step 2.
¾ 7-3-3-23 ¾
Operation and Information
Operation and Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents