Nitsuko 1232 Instruction And Installation Manual page 130

OPERATION
1. Lift handset or press SPK.
2. Press one of Paging key.
(Refer to previous table)
RELATED FEATURES
Paging
4. Doorphone Call
DESCRIPTION
User can make Doorphone Call only pressing the DOOR key. DSS Console has 2 DOOR keys
(DOOR1 and DOOR 2). These keys are assigned to each Doorphone. DSS Console can also have
Door Lock Control feature.
OPERATION
1. Lift handset or press SPK.
2. Press one of DOOR key.
RELATED FEATURES
Doorphone
Door Lock Control
5. Message Waiting
DESCRIPTION
DSS Console has a MW Lamp same as the other extension. When the MW Lamp is flashing, it means
a Message is waiting for you to call back.
OPERATION
To set the Message Waiting:
1. Dial extension No. or press one of DSS key.
(This extension is Busy or No-answer.)
2. Press MW key on the DSS Console.
(The MW Lamp and the message waiting extension LED on the console flash slowly.)
(The MW Lamp/Indicator on the message waiting extension flashes quickly.)
To clear the message waiting:
1. On-Hook condition.
2. Press MW key and DSS key which is set the MW.
RELATED FEATURES
Message Waiting
6. Unannounced Transfer
DESCRIPTION
When transferring a Trunk Line call, pressing the TRFR key sends a calling tone to the transferred
extension until the held line is picked up by the transferred party.
Other Intercom Features
¾ 4-54 ¾