Nitsuko 1232 Instruction And Installation Manual page 216

Program 30
This program assigns timer for voice message features.
With DISA, voice messages are sent:
1. Voice message transmission port is not answered automatically after ringing.
2. Voice message transmission port is not On-hook after answering automatically.
When this setting time is exceeded, dial tone is heard. (Wait a DTMF dial condition)
Display Indication
A N N . T I M E R S
# # # # # 3 0 - N # # #
Program 31
This program assigns a timer for Trunk-to-Trunk conversation cut off.
On the Trunk-to-Trunk operation, when user forgot to dial "#" as the result of silence. (1)
On the Trunk-to-Trunk operation, when conversation finished and On-hook, if user does not dial "#,
#", Trunk-to-Trunk condition continues.
(1st and 2nd Line keys lamp lighting red condition.) (2)
On the (1) and (2) condition, when the timer elapses, both of 1st and 2nd lines will be cut off
automatically.
Display Indication
L N . T O # L N . T I M E R S
# # # # # 3 1 - N # # #
N. 1: Automatic answering timer
# # # # # #
2: DT (Dial Tone) sent timer
- T T T
TTT. Attendant revert timer
000: Time out disabled
001 - 255: 1 - 255 seconds
N. 1: Path connection waiting timer
#
2: Warning tone timer for conversation cut off
- T T T
TTT. Time
000: Time out disabled
001 - 255: 1 - 255 seconds
¾ 5-19 ¾
Input Data
Input Data
(N = 1)
1 - 255 minutes (N = 2)
Initial
(N = 1)
TTT: 030
(N = 2)
TTT: 030
Initial
(N = 1)
TTT: 030
(N = 2)
TTT: 003