Nitsuko 1232 Instruction And Installation Manual page 220

Program 41
This program selects up to 30 Restricted Codes for Class C and D, numbered 1 - 30. A Restricted
Code can be up to five digits long.
Display Indication
R E S T R . C O D E S
# # # # # 4 1 - N N - D D D D D
Program 42
This program creates Walking Toll Restriction Security Codes. Up to 30 security codes can be
created. The security codes are identified by the numbers 01 - 30, and each code is four digits long.
Display Indication
U N R E S T . S E C . C O D E S
# # # # # 4 2 - N N
Program 43
This program assigns restriction class (A to F) to each Walking Toll Restriction Security Code.
Display Indication
U N R E S T . C L A S S
# # # # # 4 3 - N N
N. Restrict code number (1 - 30)
# D 2 # #
DD. Restrict code
(From 1 to 5 digits set allowed)
* To clear data, press OPAC key.
* A maximum of 30 types can be programmed.
N. Security Code number (01 - 30)
DDDD. Security Code
# - D D D D
* To clear data, press OPAC key.
* A maximum of 30 types can be programmed.
N. Number (01 - 30)
# # # #
D. Restriction class
# # # # - D
0 - 5: Class A - F
* "N" is corresponding security code in the
Program 42.
* Class shall be defined in Program 35.
¾ 5-23 ¾
Input Data
Input Data
(From 1 to 4 digits set allowed)
Input Data
Initial
(N = 1 -30)
DDDDD :
No setting
Initial
(N =01-30)
DDDD :
No setting
Initial
(N =01-30)
D: 0