Nitsuko 1232 Instruction And Installation Manual page 209

Program 14
This program assigns an extension number to a telephone port.
Display Indication
(Start condition)
F L E X . S T A . # I N G
# # # # # 1 4 - 0 0
(Digit setting mode)
F L E X . S T A . # I N G
# # # # # 1 4 - 0 0
(2 digits mode)
F L E X . S T A . # I N G
# # # # # 1 4 - S T
(3 digits mode)
F L E X . S T A . # I N G
# # # # # 1 4 - S T
Originally assigned extension numbers in 3 digits mode are 110 to 173. If the customer wants other
extension number within a specific range, extension numbers must be changed by this program.
* Enter the digit setting mode
1. Press " * " key.
# # #
# # # # # #
* Digit set operation
# # #
1. Dial "00" and "2" or "3".
(2 or 3 digits mode select)
2. Press " * " key.
# # - 0 0 2
(Return to the start condition)
ST. Extension number (10 - System Max)
# # #
SS. 10 - 79 (2 digits mode)
SS: 00 (Not assigned)
# # # - S S
SSS. 100 - 799
# # #
(3 digit mode is not available on TX-Z 308
system.)
# # - S S S
¾ 5-12 ¾
Input Data
(3 digits mode)
SSS: 000 (Not assigned)
Initial
Digit: 002
SS = ST