Nitsuko 1232 Instruction And Installation Manual page 372

To record a Transfer Message (Personal Message):
(This operation requires that extension is set the Meet-Me Paging Transfer Mode.)
Display Indication
# # S U N # 2 5 #
R E C . T R F R . M E S S A G E
0 0 : 0 0 : 0 0 # 1 2 : 0 0 P M
R E C . T R F R . M E S S A G E
0 0 : 0 0 : 0 6 # 1 2 : 0 0 P M
R E C . T R F R . M E S S A G E
# # S U N # 2 5 #
1 0 # # # # # # # # # # # # # #
Features on Transfer
(KTS)
1 2 : 0 0 P M
1. Lift handset or press SPK. (See Note 1)
2. Dial 950. (see Note 2)
3. Dial *. (Recording and timer counting start.)
4. Record a message from handset or MIC.
5. Dial *. (Recording and timer counting finish.)
(For Example: Recording time is 6 sec.)
(see Note 3)
6. Hang up or press SPK.
1 2 : 0 0 P M
When user hangs up or presses SPK without dialing * or
*
#, the recorded message will be saved. When maximum
time of recording (4/8/12/16 sec.) has passed during
message recording, timer counting automatically be
finished and the recorded message will be saved.
(SLT)
1. Lift handset.
2. Dial 7 and 950. (Dial Plan 1) (see Note 2)
2. Dial 0570 (9570). (Dial Plan 2) (see Note 2)
3. Dial *. (Recording start.)
4. Record a message from handset.
5. Dial *. (Recording is finished and Dial Tone may be sent.)
(see Note 3)
6. Hang up.
When user hangs up without dialing * or #, the recorded
*
message will be saved. When maximum time of recording
(4/8/12/16 sec.) has passed during message recording,
timer counting automatically be finished and the recorded
message will be saved.
Note 1: When Program #75-D is 0 (No tone), press ICM key
Note 2: When VAU unit is not insert in the system, Voice
Note 3: If user dials "#" instead of "*", recording contents will
¾ 7-3-3-20 ¾
Operation and Information
or
to seize Intercom after lifting handset.
Paths are occupied or Memory area for the Personal
Message is full condition, Busy Tone will be sent.
be canceled and Dial Tone may be sent.