Nitsuko 1232 Instruction And Installation Manual page 357

To confirm an Absent Message (Personal Message): (Cont'd)
Display Indication
To Confirm the Messages
On the Leave a Message (from outside), Leave a Telephone Number, General Message and
Message Waiting features, when Messages or Telephone Numbers are left by the other extension or
outside caller, MW lamp/Indicator at KTS is flashing. Confirming operation (Press CHECK and dial *)
is common for Leave a Message (from outside), Leave a Telephone Number, General Message and
Message Waiting features. When the extension has been set these features at the same time, left
messages or telephone numbers will be confirmed according to the following order.
Leave a Message ® Leave a Tel. No. ® General Message ® Message Waiting
Order:
To confirm Left Message(s):
Display Indication
L E A V E # A # M E S S A G E
T O T A L # 0 5 # # # # #
# # S U N # 2 5 #
P L A Y # M E S S A G E
Features on DISA
(SLT)
1. Lift handset.
2. Dial 7 and 951. (Dial Plan 1) (see Note 2, 3)
2. Dial 0571 (9571). (Dial Plan 2) (see Note 2, 3)
3. Hear a message from handset. (see Note 4)
4. Hang up.
Note 1: When Program #75-D is 0 (No tone), press ICM key
Note 2: When VAU unit is not inserted in the system or Voice
Note 3: When Personal Message is not recorded, Dial Tone
Note 4: When recorded contents has been finished, 1-beep
(KTS with Display)
1. Press CHECK and dial *.
# 0 1
(For Example: If total 5 messages are left, then first
message will be confirmed.)
User can select the message to be erased by dialing * or
*
#. (*: Scroll forward, #: Scroll backward)
2. Press ICM. (see Note 1, 2, 3)
1 2 : 0 0 P M
(Play-back message No. 1.)
# # #
(KTS)
1. Lift handset or press SPK. (See Note 4)
2. Dial *. (see Note 1, 2, 3, 5)
(Play-back message.)
¾ 7-3-3-5 ¾
Operation and Information
or
to seize Intercom after lifting handset.
Paths are occupied, Busy Tone will be sent.
may be sent.
tone (400 Hz, 0.5 sec.) will be sent.
Operation and Information