Download
Share
Print this page
  1. Manuals
  2. Brands
  3. RST Instruments Manuals
  4. Data Loggers
  5. RSTAR Affinity Gateway
  6. Installation and user manual

RST Instruments RSTAR Affinity Installation And User Manual

Tilt logger
Hide thumbs Also See for RSTAR Affinity:

Advertisement

Quick Links

Download this manual
RSTAR Affinity Tilt Logger Installation
and User Manual
All efforts have been made to ensure the
RST Instruments LTD.
accuracy and completeness of the
11545 Kingston St.,
information contained in this document.
Maple Ridge, BC
RST Instruments Ltd. reserves the right to
Canada V2X 0Z5
change the information at any time and
SALES + SERVICE +MANUFACTURING
assumes no liability for its accuracy.
604-540-1100
|
info@rstinstruments.com
Copyright © 2022. RST Instruments Ltd.
All rights reserved.
Toll Free (USA & Canada)
Document Number: PSM0005A
1-800-665-5599
Release Date: 23 January 2025
www.rstinstruments.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the RSTAR Affinity and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RST Instruments RSTAR Affinity

Summary of Contents for RST Instruments RSTAR Affinity

  • Page 1 11545 Kingston St., information contained in this document. Maple Ridge, BC RST Instruments Ltd. reserves the right to Canada V2X 0Z5 change the information at any time and SALES + SERVICE +MANUFACTURING assumes no liability for its accuracy.

  • Page 2: Table Of Contents

    RSTAR Affinity Tilt Logger Installation and User Manual ABLE OF ONTENTS .................... 6 NTENDED UDIENCE ............. 6 CONS AND ONVENTIONS UIDE ................. 6 BBREVIATIONS AND CRONYMS .................. 6 AFETY AND RECAUTIONS ....................7 NTRODUCTION System Components ................. 8 Features ....................11 Applications .....................
  • Page 3 IST OF IGURES Figure 1: RSTAR Affinity Tilt Logger Unit with Internal Antenna and Baseplate ....8 Figure 2: RSTAR Affinity Tilt Logger with External Antenna and Baseplate ......9 Figure 3: Removing the Battery Insulator Pull Tab ............. 12 Figure 4: Select Site Menu ....................
  • Page 4 RSTAR Affinity Tilt Logger Installation and User Manual Figure 20: Masking Tape on ¼” Concrete Drill Bits for Holes A1, A2 & A3 for ¼” x 2-¼” long Wedge Anchors ..................27 Figure 21: ¼” x 2-1/4” long Wedge Anchor threads protruding out of concrete ....28 Figure 22: Leveling and Fastening Drilling Template on Hole A1 with ¼"...
  • Page 5 Figure 73: Navigating to the Network Connection Menu ............ 65 Figure 74: Check Signal Strength Between the Affinity Tilt Logger and Gateway ....66 Figure 75: X, Y, and Z Axial Orientation for RSTAR Affinity Tilt Logger ......73 PSM0005A RST Instruments Ltd.
  • Page 6 RSTAR Affinity Tilt Logger Installation and User Manual Figure 76: Remove Enclosure Captive Screws and Lift the Enclosure Lid to Replace Battery IST OF ABLES Table 1: Enclosure Captive Screw Tightening Torque ............12 Table 2: Angle Bracket Fastener Tightening Torque ............25 Table 3: Mounting Orientation and Anchor Type Guide for Drilling Template .....

  • Page 7: Intended Audience

    RSTAR Affinity Tilt Logger Installation and User Manual NTENDED UDIENCE The RSTAR Affinity Tilt Logger manual is designed to assist users in effectively installing, configuring, and using the Affinity Tilt Logger. It provides comprehensive guidance on the following key aspects: 1. Installation procedures.

  • Page 8: Introduction

    RST’s RSTAR Affinity Tilt Logger is a high precision autonomous 3 axis inclinometer capable of detecting deflections as small as 0.0005°. NOTE: In the context of RSTAR Affinity Tilt Logger, “tilt” and “inclination” are interchangeable. Constructed with a robust and compact design featuring IP68 weatherproofing, the Affinity Tilt Logger is an ideal choice for a variety of challenging geotechnical environments.

  • Page 9: System Components

    It helps to attach the logger to a designated mounting point. NOTE: The logger unit is attached seamlessly to the baseplate, sealing the logger’s electronics. Figure 1: RSTAR Affinity Tilt Logger Unit with Internal Antenna and Baseplate PSM0005A RST Instruments Ltd.

  • Page 10: Figure 2: Rstar Affinity Tilt Logger With External Antenna And Baseplate

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 2: RSTAR Affinity Tilt Logger with External Antenna and Baseplate • Internal/External Antenna The internal antenna option uses a LoRa antenna that is located within the enclosure of the logger. This setup is generally suitable for environments where the distance and physical barriers between the logger and the gateway are minimal.
  • Page 11 The field utility app enables field technicians to manage and troubleshoot the Tilt Logger. It enables technicians to claim and configure the logger, diagnose issues, and download data directly to the RSTAR Affinity Data Visualization dashboard via an API. Additionally, the app supports...

  • Page 12: Features

    Affinity Data software • High precision inclination measurement, calibrated for position, cross- axis, and temperature effects • Seamless integration with RSTAR Affinity Data Platform • Internal and external antenna options ensure reliable data transmission in varying environments • Optimal Reliability with two distinct sensor options: one specifically...

  • Page 13: Ilt Ogger Onfiguration

    RSTAR Affinity Tilt Logger Installation and User Manual OGGER ONFIGURATION OWERING N THE OGGER Refer to Figure 3 and complete the following steps: 1. In a dry environment, loosen the 2 enclosure captive screws closest to the battery insulator pull tab by turning the screws counterclockwise 1 to 2 turns using a #2 Phillips driver.

  • Page 14: Device Configuration In Ios/Android Field Utility App

    RSTAR Affinity Tilt Logger Installation and User Manual CAUTION: Failure to re-tighten the enclosure screws to the specified torque rating may result in water ingress and operational failure of the Tilt Logger unit. OS/A EVICE ONFIGURATION IN I NDROID IELD TILITY 6.2.1 Connecting to the Tilt Logger...

  • Page 15: Figure 5: Device Manager Window

    RSTAR Affinity Tilt Logger Installation and User Manual 3. The Device Manager window is displayed (Figure 5). Select the logger using the specific serial number from the menu to connect via Bluetooth. NOTE: The serial number can be found printed on the lid label. This serial number will be prefixed by TL in the device cards.

  • Page 16: 6.2.2 Claiming The Tilt Logger

    RSTAR Affinity Tilt Logger Installation and User Manual 6.2.2 Claiming the Tilt Logger To claim an unclaimed tilt logger within the Affinity system, follow these steps: NOTE: “Claiming” a logger refers to the process of linking it to the selected work site.

  • Page 17: 6.2.3 Tilt Logger Configuration

    RSTAR Affinity Tilt Logger Installation and User Manual NOTE: A logger can only be linked to one work site at a time. Attempting to claim a device for a site when it is already linked to another nearby site will result in an error message, and redirection to the Device Manager window.

  • Page 18: Figure 8: Main Dashboard

    RSTAR Affinity Tilt Logger Installation and User Manual NOTE: Setting a lower reporting interval will provide more frequent readings but will deplete the battery sooner. Energy consumption will be proportional to reading frequency. RST recommends reading at least 4 times per day to capture diurnal effects.

  • Page 19: 6.2.4 Pairing To Gateway

    RSTAR Affinity Tilt Logger Installation and User Manual 6.2.4 Pairing to Gateway 1. Select Pair Gateway from the Main Dashboard (see Figure 9). The Select Gateway menu appears (see Figure 10). 2. Select the desired Gateway to link the Tilt Logger to it.

  • Page 20: Figure 10: Select Gateway Menu

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 10: Select Gateway Menu PSM0005A RST Instruments Ltd. Page 19 Released: 23 Jan 2025...

  • Page 21: 6.2.5 Sampling A Live Reading From The Tilt Logger

    RSTAR Affinity Tilt Logger Installation and User Manual 3. After selecting a Gateway, the user will be returned to the Main Dashboard. Gateway information will populate, replacing the “Pair Gateway” option (see Figure 11). Figure 11: Main Dashboard Populated with Selected Gateway’s Details 4.

  • Page 22: Tilt Logger Unit Installation

    RSTAR Affinity Tilt Logger Installation and User Manual OGGER NSTALLATION Installation and orientation for the Affinity Tilt Logger will depend on the specific project requirements. Please refer to the corresponding section and follow the outlined instructions for an effective setup.

  • Page 23: Tools And Components

    RSTAR Affinity Tilt Logger Installation and User Manual OOLS AND OMPONENTS In addition to the RSTAR Affinity Tilt Logger, the following tools and components will be required depending on the mounting needs: Installation on Concrete Structures: • Hammer or rotary hammer drill •...

  • Page 24: Mounting Guidelines

    RSTAR Affinity Tilt Logger Installation and User Manual OUNTING UIDELINES 7.4.1 Mounting Orientation 1. The Affinity Tilt Logger can be mounted with respect to 3 types of primary orientations (horizontal, vertical and horizontal using an angle bracket). 2. Depending on the intended application, the unit can be directly mounted onto a concrete surface using concrete ¼”...

  • Page 25: Figure 14: Angle Bracket Mounted Tilt Logger In Horizontal Orientation

    RSTAR Affinity Tilt Logger Installation and User Manual 3. The unit can also be assembled with an angle bracket to create a vertically oriented Tilt Logger. Figure 14: Angle Bracket Mounted Tilt Logger in Horizontal Orientation 4. To install a horizontally oriented Affinity Tilt Logger using a secondary bracket, an angle bracket and mounting fasteners will be required.

  • Page 26: 7.4.2 Mounting Onto A Concrete Structure

    RSTAR Affinity Tilt Logger Installation and User Manual Table 2: Angle Bracket Fastener Tightening Torque Base Plate and Angle Angle Bracket Fastener Tightening Bracket Material Torque in-lb. Stainless Steel 24-25 2.71-2.82 Anodized Aluminum 28-30 3.16-3.39 7.4.2 Mounting Onto a Concrete Structure 1.

  • Page 27: Direct Mounted Or Vertical Orientation Using 1/4" Wedge Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual 4. The table below outlines the mounting orientation and anchor type that corresponds to the hole sets shown on the drilling template. Table 3: Mounting Orientation and Anchor Type Guide for Drilling Template...

  • Page 28: Figure 19: Drilling Template Hole Set A, Corresponding To Affinity Tilt Logger Base Plate Mounting Slots For ¼" Wedge Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual 2. Hole set A consisting of hole A1, and bushings A2 & A3 of the Drilling Template will be used for this installation. Note that hole A1, bushing A2 & bushing A3 corresponds to the three mounting slots on the Affinity Tilt Logger Base Plate shown below.

  • Page 29: Figure 21: ¼" X 2-1/4" Long Wedge Anchor Threads Protruding Out Of Concrete

    RSTAR Affinity Tilt Logger Installation and User Manual 4. Estimate the desired location of the first hole to drill. The first hole corresponds to mounting hole A1 for both the Drilling Template and Affinity Tilt Logger. 5. Use the first prepared drill bit for hole A1 to drill the first hole for the wedge anchor.

  • Page 30: Figure 22: Leveling And Fastening Drilling Template On Hole A1 With ¼" Wedge Anchor, Nut

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 22: Leveling and Fastening Drilling Template on Hole A1 with ¼" Wedge Anchor, Nut and Washer 9. Use the second prepared drill bit for hole A2 & A3 to drill the second hole through bushing A2.

  • Page 31: Figure 24: Fastening And Leveling Drilling Template On Hole A1 & Bushing A2 With Wedge

    RSTAR Affinity Tilt Logger Installation and User Manual 11. Re-install the Drilling Template onto the concrete surface and align hole A1 and bushing A2 with the 2 installed wedge anchors. Level as needed and tighten the washers and nuts to secure the Drilling Template in place.

  • Page 32: Figure 26: Installing The Affinity Tilt Logger With ¼" Wedge Anchors, Washers And Nuts

    RSTAR Affinity Tilt Logger Installation and User Manual 13. Remove the Drilling Template and install the third wedge anchor. Apply similar precautionary measures to avoid damaging the wedge anchor during hammering. 14. Install the Affinity Tilt Logger by feeding the Base Plate slots through the 3 installed ¼”...

  • Page 33: Figure 27: Installing The Affinity Tilt Logger With ¼" Wedge Anchors And Spherical Washer Set

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 27: Installing the Affinity Tilt Logger with ¼" Wedge Anchors and Spherical Washer set Figure 28: Direct Mounted Affinity Tilt Logger installed at Horizontal Orientation using ¼” Wedge Anchors PSM0005A RST Instruments Ltd.

  • Page 34: Direct Mounted Horizontal Or Vertical Orientation Using ¼" Drop-In Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 29: Direct Mounted Affinity Tilt Logger installed at Vertical Orientation using ¼” Wedge Anchors 7.4.4 Direct Mounted Horizontal or Vertical Orientation Using ¼” Drop-In Anchors 1. If provided, 3 sets of ¼” x 1” long drop-in anchors, ¼” x 5/8” long hex bolts and washers will be required to install each Affinity Tilt Logger.

  • Page 35: Figure 31: Drilling Template Hole Set B Corresponding To Affinity Tilt Logger Base Plate Mounting Slots For ¼" Drop-In Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual 2. Hole set B consisting of hole B1, and bushings B2 & B3 of the Drilling Template will be used for this installation. Note that hole B1, bushing B2 & bushing B3 corresponds to the three mounting slots on the Tilt Logger Base Plate as shown below.

  • Page 36: Figure 33: Setting Tool To Set The ¼" X 1" Long Drop-In Anchor Inside Concrete

    RSTAR Affinity Tilt Logger Installation and User Manual 4. Estimate the desired location of the first hole to drill. The first hole corresponds to mounting hole B1 for both the Drilling Template and Affinity Tilt Logger. 5. Use the first prepared drill bit for hole B1 to drill the first hole for the drop-in anchor.

  • Page 37: Figure 34: Leveling And Fastening Drilling Template On Hole B1 With ¼" Drop-In Anchor, Hex Bolt And Washer

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 34: Leveling and Fastening Drilling Template on Hole B1 with ¼” Drop-In Anchor, Hex Bolt and Washer 8. Use the second prepared drill bit for Hole B2 & B3 to drill the second hole through bushing B2.

  • Page 38: Figure 36: Leveling And Fastening Drilling Template On Hole B1 & Bushing B2 With ¼" Drop

    RSTAR Affinity Tilt Logger Installation and User Manual 9. Remove the Drilling Template and install a second drop-in anchor inside the second drilled hole. Ensure that the drop-in anchor is flushed or slightly recessed about the concrete surface. Use a setting tool to hammer the drop- in anchor permanently in place.

  • Page 39: Figure 37: Drilling Third Hole Through Bushing B3 For Drop-In Anchor

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 37: Drilling Third Hole Through Bushing B3 for Drop-In Anchor 12. Remove the Drilling Template and install a third drop-in anchor inside the third drilled hole. Ensure that the drop-in anchor is flushed or slightly recessed about the concrete surface.

  • Page 40: Figure 39: Direct Mounted Affinity Tilt Logger Installed In Horizontal Orientation Using ¼" Drop-In Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 38: Installing the Affinity Tilt Logger with ¼” Drop-In Anchors, Hex Bolts and Washers Figure 39: Direct Mounted Affinity Tilt Logger Installed in Horizontal Orientation Using ¼” Drop-In Anchors PSM0005A RST Instruments Ltd.

  • Page 41: Figure 40: Direct Mounted Affinity Tilt Logger Installed In Vertical Orientation Using ¼" Drop

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 40: Direct Mounted Affinity Tilt Logger Installed in Vertical Orientation Using ¼” Drop-In Anchors PSM0005A RST Instruments Ltd. Page 40 Released: 23 Jan 2025...

  • Page 42: Angle Bracket Mounted In Horizontal Orientation Using ¼" Wedge Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual 7.4.5 Angle Bracket Mounted in Horizontal Orientation Using ¼” Wedge Anchors 1. If provided, 3 sets of ¼” x 2-¼” long wedge anchors, washers and nuts will be required to install each Affinity Tilt Logger. Refer to the earlier section for instructions to assemble the Affinity Tilt Logger onto the Angle Bracket.

  • Page 43: Figure 43: Masking Tape On ¼" Concrete Drill Bits For Holes C1, C2 & C3 For ¼" X 2-¼" Long

    RSTAR Affinity Tilt Logger Installation and User Manual 3. If the ¼” x 2-¼” long wedge anchors are provided, wrap masking tape or equivalent tape around 2x ¼” carbide-tipped steel concrete drill bits to set the required drill depths for holes C1, C2 & C3. The distance should be set as from the start of the drill shank (not the tip) to the start of the masking tape as shown below.

  • Page 44: Figure 44: ¼" X 2-1/4" Long Wedge Anchor Threads Protruding Out Of Concrete

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 44: ¼” x 2-1/4” Long Wedge Anchor Threads Protruding Out of Concrete 8. Place the Drilling Template onto the concrete surface and align Hole C1 with the installed wedge anchor. Use a level as needed to level the template, install the washer and nut and tighten to clamp the Drilling Template down.

  • Page 45: Figure 46: Drilling Second Hole Through Bushing C2 For Wedge Anchor

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 46: Drilling Second Hole Through Bushing C2 for Wedge Anchor 10. Remove the Drilling Template and install the second wedge anchor. Apply similar precautionary measures to avoid damaging the wedge anchor during hammering.

  • Page 46: Figure 48: Drilling Third Hole Through Bushing C3 For Wedge Anchor

    RSTAR Affinity Tilt Logger Installation and User Manual 12. Use the second prepared drill bit for hole C2 & C3 to drill a third hole through bushing C3. Drill until the masking tape touches the top surface of bushing C3. This will ensure that the correct hole depth of 1-1/8” has been achieved.

  • Page 47: Figure 49: Installing The Affinity Tilt Logger With ¼" Wedge Anchors, Washers & Nuts

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 49: Installing the Affinity Tilt Logger with ¼” Wedge Anchors, Washers & Nuts NOTE: If spherical washer sets are required, install 3 sets of spherical washers and conical seats in between the base plate and concrete surface. The spherical washer sets are intended to be used on uneven surfaces.

  • Page 48: Figure 50: Installing The Affinity Tilt Logger With ¼" Wedge Anchors And Spherical Washer Set

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 50: Installing the Affinity Tilt Logger with ¼" Wedge Anchors and Spherical Washer PSM0005A RST Instruments Ltd. Page 47 Released: 23 Jan 2025...

  • Page 49: Figure 51: Angle Bracket Mounted Affinity Tilt Logger Installed In Horizontal Orientation Using

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 51: Angle Bracket Mounted Affinity Tilt Logger Installed in Horizontal Orientation Using ¼” Wedge Anchors PSM0005A RST Instruments Ltd. Page 48 Released: 23 Jan 2025...

  • Page 50: Angle Bracket Mounted In Horizontal Orientation Using ¼" Drop-In Anchors

    RSTAR Affinity Tilt Logger Installation and User Manual 7.4.6 Angle Bracket Mounted in Horizontal Orientation Using ¼” Drop-In Anchors 1. If provided, 3 sets of ¼” x 1” long drop-in anchors, hex bolts and washers will be required to install each Affinity Tilt Logger. Refer to the earlier section for instructions to assemble the Affinity Tilt Logger onto the Angle Bracket.

  • Page 51: Figure 53: Drilling Template Hole Set D Corresponding To Affinity Tilt Logger Angle Bracket Mounting Holes For ¼" Drop-In Anchor

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 53: Drilling Template Hole Set D Corresponding to Affinity Tilt Logger Angle Bracket Mounting Holes for ¼” Drop-In Anchor 3. If the ¼” x 1” long drop-in anchors are provided, wrap masking tape or equivalent tape around 2x 3/8”...

  • Page 52: Figure 55: Setting Tool To Set The ¼" X 1" Long Drop-In Anchor Inside Concrete

    RSTAR Affinity Tilt Logger Installation and User Manual WARNING: Do not use the Drilling Template as a guide to drill the first hole. The Drilling Template may spin uncontrollably about the drill bit. 6. Install the first drop-in anchor by placing it inside the drilled hole. Ensure that the drop-in anchor is flushed or slightly recessed about the concrete surface.

  • Page 53: Figure 57: Drilling Second Hole Through Bushing D2 For Drop-In Anchor

    RSTAR Affinity Tilt Logger Installation and User Manual 8. Use the second prepared drill bit for hole D2 & D3 to drill the second hole through bushing D2. Drill until the masking tape touches the top surface of bushing D2. This will ensure that the correct hole depth of 1” has been achieved.

  • Page 54: Figure 58: Leveling And Fastening Drilling Template On Hole D1 & Bushing D2 With ¼" Drop-In Anchors, Hex Bolts And Washers

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 58: Leveling and Fastening Drilling Template on Hole D1 & Bushing D2 with ¼” Drop-In Anchors, Hex Bolts and Washers 11. Use the second prepared drill bit for hole D2 & D3 to drill the third hole through bushing D3.

  • Page 55: Figure 60: Installing The Affinity Tilt Logger With ¼" Drop-In Anchors, Hex Bolts And Washers

    RSTAR Affinity Tilt Logger Installation and User Manual 13. Install the Affinity Tilt Logger by aligning the 3 installed drop-in anchors with the open slots of the Base Plate. If supplied, install the ¼” x 5/8” long hex bolts and washers. Level and apply thread locker as needed tighten the bolts to 75 in-lbs.

  • Page 56: Figure 61: Angle Bracket Mounted Affinity Tilt Logger Installed In Horizontal Orientation Using

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 61: Angle Bracket Mounted Affinity Tilt Logger Installed in Horizontal Orientation Using ¼” Drop-In Anchors PSM0005A RST Instruments Ltd. Page 55 Released: 23 Jan 2025...

  • Page 57: 7.4.7 Mounting Onto A 2" Diameter Pole Using U-Bolts

    RSTAR Affinity Tilt Logger Installation and User Manual 7.4.7 Mounting onto a 2” Diameter Pole Using U-Bolts 1. Assemble the Affinity Tilt Logger onto the Angle Bracket using the supplied mounting fasteners as mentioned in the earlier section. Figure 62: Assembling Angle Bracket onto Affinity Tilt Logger 2.

  • Page 58: Mounting Onto Varying Size Diameter Poles Using Gear Clamps

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 63: Installing Affinity Tilt Logger using 2" U-Bolts and ¼” Hex Nuts and Washers 7.4.8 Mounting onto Varying Size Diameter Poles Using Gear Clamps 1. To mount the Affinity Tilt Logger onto a pole using gear clamps, use the appropriate gear clamp sizes as shown on the following table.

  • Page 59: Figure 64: Installing The Affinity Tilt Logger With Gear Clamps Through The Inner Slots Of The

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 64: Installing the Affinity Tilt Logger with Gear Clamps through the Inner Slots of the Angle Bracket 3. To mount the Affinity Tilt Logger onto a larger than 2-1/2” diameter post size, install a pair of the required gear clamps onto the outer slots of the Angle Bracket and level as needed.

  • Page 60: Direct Mounted Horizontal Or Vertical Orientation Using Magnets

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 65: Installing the Affinity Tilt Logger with Gear Clamps through the Outer Slots of the Angle Bracket 7.4.9 Direct Mounted Horizontal or Vertical Orientation using Magnets NOTE: This method attaches the Affinity Tilt Logger onto a flat steel surface without the need to drill or tap holes onto the steel surface.

  • Page 61: Figure 66: Installing Steel Cup Enclosed Magnets Onto The Affinity Tilt Logger

    RSTAR Affinity Tilt Logger Installation and User Manual Table 5: Magnet Fastener Tightening Torque for Stainless Steel Base Plate Base Plate Material Magnet Fastener Tightening Torque in-lb Stainless Steel 2.37 Figure 66: Installing Steel Cup Enclosed Magnets onto the Affinity Tilt Logger 3.

  • Page 62: Figure 67: Installing Affinity Tilt Logger Onto Steel Surface

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 67: Installing Affinity Tilt Logger onto Steel Surface Figure 68: Direct Mounted Affinity Tilt Logger Installed in Vertical Orientation using Magnets PSM0005A RST Instruments Ltd. Page 61 Released: 23 Jan 2025...

  • Page 63: Angle Bracket Mounted Horizontal Orientation Using Magnets

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 69: Direct Mounted Affinity Tilt Logger Installed in Horizontal Orientation using Magnets 7.4.10 Angle Bracket Mounted Horizontal Orientation using Magnets NOTE: This method attaches the Affinity Tilt Logger onto a flat steel surface without the need for drilling or tapping holes onto the steel surface.

  • Page 64: Figure 70: Installing Steel Cup Encased Magnets Onto The Angle Bracket

    RSTAR Affinity Tilt Logger Installation and User Manual Table 6: Magnetic Fastener Tightening Torque for Aluminum Base Plates Base Plate and Angle Magnet Fastener Bracket Material Tightening Torque in-lb Anodized Aluminum 2.49 Figure 70: Installing Steel Cup Encased Magnets onto the Angle Bracket 3.

  • Page 65: Figure 71: Installing Angle Bracket Mounted Affinity Tilt Logger Onto Steel Surface

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 71: Installing Angle Bracket Mounted Affinity Tilt Logger onto Steel Surface Figure 72: Angle Bracket Mounted Affinity Tilt Logger installed at Horizontal Orientation using Magnets PSM0005A RST Instruments Ltd. Page 64...

  • Page 66: Post-Installation Checks

    RSTAR Affinity Tilt Logger Installation and User Manual NSTALLATION HECKS 7.5.1 Signal verification via Field Utility App If connected to a Gateway, the dashboard will contain some Gateway information. 1. Navigate to the Network Connection menu by selecting the Network arrow.

  • Page 67: Other Considerations

    RSTAR Affinity Tilt Logger Installation and User Manual Figure 74: Check Signal Strength Between the Affinity Tilt Logger and Gateway THER ONSIDERATIONS • Do not open the logger’s plate in rain or any other adverse weather conditions. Ensure there is no water on the surface on the plate when opened.

  • Page 68: Based )

    FFINITY LATFORM ROWSER ASED 1. Log in to the RSTAR Affinity Data Platform. 2. From the ADMIN menu, select the Site Management tab. 3. From the Site Management window, select the Site Name that corresponds to the paired Tilt Logger.
  • Page 69 RSTAR Affinity Tilt Logger Installation and User Manual 4. The Edit Site window appears, providing an overview of the selected site, including Satellite view and Site Information. Click the Save button located in the Site Information box on the right-hand side of the screen.
  • Page 70 RSTAR Affinity Tilt Logger Installation and User Manual 6. The Fleet Management window appears, displaying Gateways, Data Loggers and Instruments. 7. Locate the corresponding Gateway. Using the drop-down menu, display the paired Tilt Loggers for that Gateway. 8. Prior to pairing a Tilt Logger to a Gateway using the Smartphone App, it will not appear in the drop-down menu for the Gateway.

  • Page 71: Data Visualization

    RSTAR Affinity Tilt Logger Installation and User Manual ISUALIZATION 1. From the Fleet Management window, select Filters. 2. Check the boxes for Data Loggers and Tilt Logger. Select Apply 3. From the displayed results, select the specific Tilt Logger. PSM0005A RST Instruments Ltd.
  • Page 72 RSTAR Affinity Tilt Logger Installation and User Manual 4. The Tilt Logger overview window appears. The following tabs are presented: • Tilt Logger Profile o Tilt Logger Name, Tilt Logger ID, Serial Number and Gateway ID o Status and Last Reading...
  • Page 73 RSTAR Affinity Tilt Logger Installation and User Manual 6. The Visualization tab graphically represents the triaxial deflection and temperature data. PSM0005A RST Instruments Ltd. Page 72 Released: 23 Jan 2025...

  • Page 74: Tilt Axes Orientation And Convention

    Figure 75 above or below the horizontal plane. In the orientation shown in figure X, the X, Y, and Z axes would report 0º, 0º, and +90º respectively. Figure 75: X, Y, and Z Axial Orientation for RSTAR Affinity Tilt Logger NOTE: Deflection and displacement are determined using two of the three available axes.

  • Page 75: Maintenance

    Installation and User Manual 10 M AINTENANCE Maintenance of the RSTAR Affinity Tilt Logger is limited to replacing the battery for the ADL303 when depleted. CAUTION: Ensure that water from the environment does not enter the enclosure while replacing the battery.
  • Page 76 RSTAR Affinity Tilt Logger Installation and User Manual CAUTION: Only the SAFT LSH 14 is recommended for use in the ADL303. Using other cells may damage the device or result in reduced functionality. Be careful to ensure the baseplate sealing surface and the gasket are clean of any debris and the gasket is properly seated in the lid before closing the lid.

  • Page 77: Product Specifications

    RSTAR Affinity Tilt Logger Installation and User Manual 11 P RODUCT PECIFICATIONS Item Specification General Specifications Primary Inclinometer Sensor Triaxial MEMS Accelerometer Secondary Event Detection Low Power Triaxial MEMS Sensor Accelerometer Dimensions 76 mm x 110 mm x 40 mm...
  • Page 78 RSTAR Affinity Tilt Logger Installation and User Manual Bluetooth Range Sensor Specifications Precision 0.0005° (8 ug) (ADL303-L) Resolution 0.0001° (2ug) (ADL303-L)   0.002° (35 ug) (ADL303-L) Accuracy Range +/- 30 from horizontal or vertical alignment. Tilt Temperature Offset 0.0005°/°C (ADL303-L)

  • Page 79: Service , Repair And Contact Information

    RSTAR Affinity Tilt Logger Installation and User Manual 12 S ERVICE EPAIR AND ONTACT NFORMATION This product does not contain any user-serviceable parts. Contact RST for product services or repairs. • For sales information: sales@rstinstruments.com • For technical support: support@rstinstruments.com •...

  • Page 80: Appendix A: Field Utility App Additional Unctions

    RSTAR Affinity Tilt Logger Installation and User Manual A: F PPENDIX IELD TILITY DDITIONAL UNCTIONS Unclaiming a Tilt Logger From the main dashboard, navigate to the “Logger Options” menu. Select “Unclaim logger” from the provided options. A popup will appear for the user to confirm their action.
  • Page 81 RSTAR Affinity Tilt Logger Installation and User Manual NOTE: Unclaiming a logger also deletes all previously collected data from the logger. Therefore, it is recommended that the user downloads all logger data prior to unclaiming. PSM0005A RST Instruments Ltd. Page 80...

  • Page 82: Unpairing The Gateway From The Tilt Logger

    RSTAR Affinity Tilt Logger Installation and User Manual Unpairing the Gateway from the Tilt Logger From the Main Dashboard, press the second arrow on the right-hand side corner to navigate to the Network Menu to view Gateway information. PSM0005A RST Instruments Ltd.
  • Page 83 RSTAR Affinity Tilt Logger Installation and User Manual In the Network menu shown, select “Delete Gateway”. PSM0005A RST Instruments Ltd. Page 82 Released: 23 Jan 2025...
  • Page 84 RSTAR Affinity Tilt Logger Installation and User Manual In the following pop-up select “Yes”. The Tilt Logger is now unpaired from the Gateway. Upon unpairing, the Main Dashboard appears. PSM0005A RST Instruments Ltd. Page 83 Released: 23 Jan 2025...

  • Page 85: Logger Options

    RSTAR Affinity Tilt Logger Installation and User Manual Logger Options The Logger Options can be accessed by selecting “Logger Options” at the bottom of the main dashboard. The logger options menu allows for the user to download logger data, access diagnostic reports, update the logger’s firmware, update clock time, and initialize the device in the event new batteries are installed.

  • Page 86: Downloading Data

    RSTAR Affinity Tilt Logger Installation and User Manual Downloading Data From the Logger Options menu, select the “Sync logger data” option. Select “Download All Data” in the window that appears. PSM0005A RST Instruments Ltd. Page 85 Released: 23 Jan 2025...

  • Page 87: Updating Logger Firmware

    RSTAR Affinity Tilt Logger Installation and User Manual Updating Logger Firmware In the event of a new firmware release, the logger’s firmware can be updated wirelessly. From the Logger Options sidebar select the update Logger Firmware option. This initiates a data transfer between the old and new firmware. This process may take a few minutes to initiate.

  • Page 88: Initialize New Batteries

    RSTAR Affinity Tilt Logger Installation and User Manual Initialize New Batteries When new batteries are installed, the internal coulomb counter needs to be reset to ensure accurate data on the battery’s remaining life. From the logger options menu, select “Initialize new batteries.”...

  • Page 89: Modifying Profile

    RSTAR Affinity Tilt Logger Installation and User Manual Modifying Profile In the left sidebar, select the “My Profile” option. The profile information page will appear, allowing the user to view their profile information including name, email address, organization, and job title.