BWT AQA drink Operating Instructions Manual page 46

5.9 SET FILTER CAPACITY
When installing the filter for the first time or when changing the filter, the filter capacity must be set.
1. Switch off the device via the main switch (A) on the back.
2. Switch the device back on via the main switch (A) while pressing and holding the second water button,
(sketch left = Pro 60 / sketch right = Pro 60 HOT).
3. Via the following buttons the filter capacity can be set:
Button 2 (
Button 3 (
Select the relevant capacity by pressing the respective selection button.
4. Confirm selection with the selection button for cooled, sparking water . After the selection is confirmed
the unit goes back to normal operation.
Note!
The filter capacity can also be set by qualified personnel via the BWT Professional App.
5.10 PORTIONING
All AQA drink Pro 60 have three portioning functions. For each type of water, you have the following
selection options regarding the quantity dispensed:
» Individual filling quantity: Press and hold the selection button until the desired filling quantity is
reached.
» Glass/cup (~ 200 ml): Briefly press the desired selection button once. During the dispensing process, the
selection button flashes pink once.
» Carafe/Teapot (~ 1.000 ml): Briefly press the desired selection button twice. During the dispensing
process, the selection button flashes pink twice.
EN
Note!
The light on the buttons indicates which type of water and which filling quantity have been selected (button
flashes: 1 x = glass/cup, 2 x = carafe/teapot).
The portioning can also be set by qualified personnel via the BWT Professional App.
5.11 DRAW WATER
Water can either be drawn manually using the control buttons on the
device or touchless via NFC using the BWT Home App.
44
): for hard water > 5 °dGH
): for soft water < 5° dGH