BWT AQA drink Operating Instructions Manual page 31

1. SYMBOL EXPLANATION & DISCLAIMER
1.1 SYMBOL EXPLANATION
Danger due to electricity! Always contact a qualified electrician when you are working on
equipment or in locations that are marked with this symbol.
Caution! This symbol indicates a potentially hazardous situation which, if not avoided, may lead to
personal injury or damage to property.
Danger from CO2 gas! This symbol indicates a potentially dangerous situation due to the presence
of CO gas.
Danger of scalding! This symbol indicates hot liquids. If not observed there might be the risk of
scalding!
Note! This symbol highlights recommendations and information for efficient and smooth operation.
1.2 WARRANTY AND DISCLAIMER
These installation and operating instructions have been compiled with the greatest care and contain
important information for the safe and efficient use of the BWT AQA drink water dispenser. In spite of all
safety precautions, residual risks remain with every product, especially in case of improper handling. BWT
does not take any responsibility for the associated use.
The installation and operating instructions are protected by copyright. The instructions may not be passed on
to third parties, reproduced in any type and form - even in extracts - or used and/ or communicated to third
parties without the written consent of the manufacturer. Contraventions obligate to compensation for
damages. We reserve the right to make further claims.
The BWT AQA drink Pro 60 water dispenser comes with a 2-year warranty. The instructions and
recommendations given and the local drinking water/food and disposal regulations applicable to the area of
use must be observed. All information and advice in these installation and operating instructions take into
account applicable standards and regulations, the state of technology, as well as our many years of
knowledge and experience. Illustrations in these instructions are for basic understanding and may differ from
the actual design of the unit. No claims can be derived from them. BWT assumes no liability for damages
and consequential damages due to:
» non-compliance with the information given in these installation and operating instructions;
» use for purposes other than the intended purpose;
» incorrect or faulty installation;
» incorrect commissioning, operation and maintenance;
» use of components that have not been approved;
» non-performance of the prescribed service and replacement work;
» unauthorised technical or mechanical changes or modifications.
Responsibility of the operating company:
» The installation and operating instructions must be kept in the immediate vicinity of the device and must
be accessible at all times.
» The device may only be operated in a technically correct and operationally safe condition.
» The information in these installation and operating instructions must be complied with, at all times.
» Only qualified personnel may install, operate and maintain the AQA drink dispenser (see also chapter 5.2
" Installation & operating requirements")
EN
29