Related Manuals for BWT AQA drink
Summary of Contents for BWT AQA drink
- Page 1 FILTER CARTRIDGES AND FILTER HEAD FOR Magnesium Mineralized AQA drink Water Filter system for optimising drinking water Installation and operating instructions PROTECT...
- Page 2 1× = 1 °dGH 10 ml Copyright © 2018 BWT. Alle Rechte vorbehalten. All rights reserved. Tous droits réservés. Todos los derechos reservados. Tutti i diritti riservati. Все права защищены. Direitos reservados.
-
Page 3: Table Of Contents
Table of Contents Scope of delivery ..........................Technical Data ..........................Dimensions und weights ......................Operating conditions ......................Typical capacities and chlorine reduction ................Usage and design ..........................Assigned use ........................... Design and function of the filter system ................Operating and safety instructions ....................Responsibility of the operator .................... -
Page 4: Scope Of Delivery
1 Scope of delivery For professional installation of the filter system the following parts are required: Filter cartridge (1) with hygienic cap and male thread for screwing into the filter head (2). Filter head (2) with female thread for mounting the filter cartridge (1), suitable for all filter cartridge sizes with installation label. -
Page 5: Usage And Design
3 Usage and design 3.1 Assigned use This BWT filter cartridge … is only to be used for decarbonizing cold water fulfilling the legal requirements for drinking water. reduces total* hardness and thus protects appliances against lime scale deposits. -
Page 6: Responsibility Of The Operator
The instructions in this installation and operating manual must be followed entirely. 4.2 Warranty and exclusion of liability BWT warrants to the original purchaser/consumer all equipment that it munufactures to be free from defects in material and workmanship for a period of 2 years from the date of purchase. This... -
Page 7: Qualified Personnel
NOTE! f Decarbonized water contains free carbonic acid. Only appropiate materials are to be used for installation. Original BWT accessoiries are recommended. 5.1 Unpacking the filter system Remove the filter system from the packaging. Inspect the delivery for completeness and trans- port damage. -
Page 8: Fitting The Filter Bracket
The bypass should be sealed with the included warranty label. Note month and year on the label. NOTE! f BWT recommends to choose the size of the filter cartridge with its capacity to be due for replacement in 6 to 12 month intervals. 5.4 Fitting the filter head CAUTION! f The filter head is never to be left under mains water pressure without a mounted filter cartridge. -
Page 9: Installing A Water Meter
5.5 Installing a water meter BWT recommends the installation of a water meter in the inlet of the filter cartridge in case the filter system is used for a device without an integrated water meter (e.g. coffee machine) which indicates the required replacement of the filter cartridge. With the water meter the filter cartridge’s residual capacity can be determined at any time. -
Page 10: Trouble Shooting
7 Trouble shooting Error Cause Action Filtered water cannot Water supply in general is Test all valves and open if necessary be drawn stopped or a valve is closed Filter cartridge not screwed Unscrew filter by ½ rotation and reinsert properly into the filter head as far as possibel (Section 5.5) - Page 12 VITAL, FRESH & DELICIOUS LIMESCALE PROTECTION BWT UK Limited BWT House, The Gateway Centre, Coronation Road, High Wycombe, Buckinghamshire. HP12 3SU 04194 838 100 enquiries@bwt-uk.co.uk bwt.com...
Need help?
Do you have a question about the AQA drink and is the answer not in the manual?
Questions and answers