BWT AQA drink Operating Instructions Manual page 33

2. USE AND CONSTRUCTION
The BWT AQA drink Pro 60 is a tap water dispenser, i.e. the unit is to be exclusively fed with cold water of
drinking water quality. Any other use is considered improper. In combination with a BWT AQA drink filter
cartridge A (Fig. 1) with ultrafiltration membrane and a UV reactor, you have unlimited access to clean and
tasty drinking water at all times. Depending on your taste, uncooled still, cooled still, cooled mildly sparkling,
cooled sparkling or hot (depending on the device). The water dispenser is available as a table-top or stand-
alone unit with a base cabinet and therefore finds a suitable place anywhere. A programmable monitoring
unit is built into the unit so that you are always informed about the filter capacity.
It is recommended to use a BWT AQA drink MPC500 filter cartridge
water into a pleasurable taste experience. Thanks to the patented BWT Magnesium technology, the water is
filtered in five filtration stages and mineralised with Magnesium (Fig. 2).
1 Primary filtration filters particles, e. g. sand or rust.
2 Activated-carbon preliminary filter for protecting the ion exchanger.
3 Powerful ion exchanger with efficient limescale protection. Provides the essential mineral magnesium.
Reducing the amount of heavy metals such as copper, lead and nickel.
4 Activated-carbon filtration reduces substances impairing taste and smell, such as chlorine.
5 Ultrafiltration technology retains bacteria and removes even the tiniest particles, such as microplastics.
An Aquastop is fitted in the AQA drink filter head
filter installation or filter replacement. The bypass function
the amount of bypass - the amount of water that is only filtered by steps 4 and 5 (Fig. 2) - (see chapter 5.8
"Installing the filter").
Note!
The actually delivered BWT AQA drink filter may differ from the version mentioned in the operating
instructions. Please ask your BWT contact for support in case of any uncertainties.
The filtered drinking water corresponds to Liquid Category 2 in accordance with EN 1717.
The BWT AQA drink filter head is only suitable for original BWT AQA drink filter cartridges.
BWTApps for even more user-friendliness
The BWT AQA drink Pro 60 is equipped with app support, both for users and for maintenance and
monitoring, offering even greater ease of use:
» BWT Home App for users:
Enables touch-less operation of the water dispenser. The user can select the desired type and amount of
water directly from the mobile phone, minimising bacterial contamination on the unit.
» BWT Professional App for professional device management:
Makes the water dispenser loT-enabled and facilitates maintenance and monitoring (Precondition:
available WiFi network):
- Step-by-step guide for easy installation and configuration
- Step-by-step guide for easy cleaning and disinfection
- Real-time function and error overview via a debug menu
- Fleet management (or via the web page bfilter.bwt.com)
- Detailed statistics (or via the web page bfilter.bwt.com)
A (Fig. 1), which will transform your tap
B (Fig. 1) to prevent unintentional water spillage during
С (Fig. 1) on the filter head can be used to adjust
EN
31