Specifications - Aiwa Z-D7100M Operating Instructions Manual

Table of Contents

Advertisement

SPECIFICATIONS
TUNER TX-29100
<FM section>
Fréquency range
Usable sensitivity (IHF)
Alternate channel selectivity
Signal-to-noise ratio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<AM section:
YH, YLH>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
<MW section:
YEE, YEZ>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
<LW section: YEE, YEZ>
Frequency range
Usable sensitivity
Antenna
<Timer section and general>
Program timer
Sleep timer
Dimensions (W x H x D)
Weight
AMPLIFIER MX-Z7100M
Power output
Harmonic distortion
87.5 MHz to 108: MHz
2.2 uV (75 ohms) 18.2 dBf
YH, YLH: 50 dB (+ 400kHz)
YEE, YEZ: 65 dB (+ 400kHz)
YH, YLH: 70 dB (STEREO)
78 dB (MONO)
YEE, YEZ: 70 dB (STEREO)
75 dB (MONO)
0.8% (MONO), 1 kHz
0.8% (STEREO), 1 kHz
20 Hz to 15 kHz (+0.5 dB, -3 dB)
YH, YLH:
40 dB at 1 KHz
YEE, YEZ: 30 dB at 1 kHz
75 ohms (unbalanced)
531 (530) kHz to 1,602 (1,710) kHz
300 uV/m
22 dB (9 kHz)
53 dB (100 dB input)
Loop antenna
522 kHz to 1,611 kHz
400 wV/m
22 dB (9 kHz)
53 dB (100 dB input)
Loop antenna
144 kHz to 290 kHz
1,000 nV/m
Loop antenna
"Once" and/or "every"
Capable of setting in 10 minute
increments, 99 minutes maximum
360 x 88 x 315 mm (1414 x 31/2 x 12'/2 in.)
2.3 kg (5.28 Ib.)
HE, LH: 50 W +50 W (6 ohms, T.H.D. 10%, 1 kHz)
EE, EZ: 40 W + 40 W (6 ohms, T.H.D. 1%, 1 kHz)
K: 50 W + 50 W (6 ohms, T.H.D. 1%, 1 kHz)
60 W +.60 W (6 ohms, T.H.D. 10%, 1kHz)
0.05% (25 W, 1 kHz, 6 ohms)
Input sensitivity (load impedance)
Signal-to-noise ratio
Power consumption
Dimensions (W x H x D)
Weight
CASSETTE DECK FX-W2Z7100
Track format
Frequency response
Signal-to-noise ratio
Wow and flutter
Tape speed
Rewind time
Fast forward time
Recording system
Erase system
Motor
Heads
46
VIDEO 1/DAT: 300 mV (33 kohms)
VIDEO 2/AUX: 600 mV (27 kohms)
85 dB
_ HE, LH: 88 W (System total 117 W)
EE, EZ: 215 W (System total 240 W)
K: 300 W (System total 330 W)
360 x 128 x 382.5:mm (14%/4 x 5'/s x 13's in.)
HE, LH: 5.2 kg (11.44 Ib.)
EE, EZ: 5.15 kg (11.33 tb.)
K: 5.75 kg (12.65 Ib.)
4 tracks, 2 channels
Metal tape: 20 — 17,000 Hz
CrQz tape: 20 ~ 16,000 Hz
Normal tape: 20 — 15,000 Hz
65 dB (Dolby NR ON, Metal tape peak level
above 5 kHz)
0.12% (WRMS)
+ 0.19% (WPEAK)
4.8 cm/sec: (17/s ips)
9.5 cm/sec. (double speed)
120 sec. (C-60)
120 sec. (C-60)
AC bias
AC erase
DC servomotor x 2
Playback head x 1 (deck 1)
Record/playback/erasure head x 1 (deck 2)
360 x 128 x 309.5 mm (14%/4 x 5a x 1214 in.)
3.0 kg (6.6 Ib.)
Dimensions (W x H x D)
Weight
:
GRAPHIC EQUALIZER GE-Z7100
Input
210 mV (47 kohms)
Output
210 mV (47 kohms)
Dimensions (W x H x D)
360 x 88 x 308 mm (14%/4 x 3%/2 x 12% in.)
Weight
2.2 kg (4.84 lb.)
SPEAKER SX-Z7100
Cabinet type
3 way, bass reflex
Speaker
220 mm cone type woofer
60 mm cone type tweeter
30 mm ceramic type super tweeter
Impedance
6 ohms
Music power
60 W
Output sound pressure level
90 dB/W/m
276 x 530 x 230 mm (107s x 20'/s x 9#/s in.)
6.2 kg (13.6 Ib.)
Dimensions (W x H x D)
Weight
COMMON SECTION (See the suffix of MX-Z7100M)
Power requirements
HE, LH:
120/220/240 V AC, selectable, 50/60 Hz
EE, EZ: 230 V AC, 50 Hz
K: 230 — 240 V AC, 50 Hz
HE, LH: ~
940 x 530 x 332.5 mm
(37'/s x 20'/e x 131s in.)
(vertical placement)
1300 x 530 x 332.5 mm
(51/4 x 2077/s x 131/s in.)
(horizontal placement)
EE, K, EZ:
912 x 5380 x 332.5 mm
(36 x 207/e x 13%/e in.)
(vertical placement)
1272 x 580 x 332.5 mm
(50%/e x 207/e x 13%%e in.)
(horizontal placement)
HE, LH: 27.3 kg (60.1 Ib.)
EE, EZ: 25.05 kg (55.1 Ib.)
K: 25.65 kg (56.4 Ib.)
FM feeder antenna (HE, LH models only) (1)
FM unipole antenna (EE, K, EZ models only) (1)
AM loop antenna (1)
Remote controller (1)
Operating instructions (1)
Dimensions (W x H x D)
Weight
Accessories
* Specifications and external appearance are subject to change without notice due to
product improvement.
® Dolbynoise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
* "DOLBY" and the double-D symbol DO are 'trademarks of Dolby Laboratories
Licensing Corporation.
* The word "BBE" and the "BBE symbol" are trademarks of BBE Sound, Inc.
° Under licence from BBE Sound, Inc.
Note
Please check the laws on copyright related to recordings from discs, radio or external
tape for the country in which the machine is being used.

Advertisement

Table of Contents
loading

Table of Contents