Presetting Stations; Basic Operations - Aiwa Z-L100 Operating Instructions Manual

Compact disc stereo system
Hide thumbs Also See for Z-L100:
Table of Contents

Advertisement

PRESETTING STATIONS
|
PRESET
1
0-9, +10
MICLEAR
BAND
SHIFT
2
1
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
7 Press TUNER/BAND to select.a band, and press
<< DOWN or
PF UP to select a station.
2 Press IISET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
"FULL is displayed if you attempt to store more than 32 preset
stations.
,
agagaeuacaae neghagsey a csesans pase
HDDAP REED ESR SURE a
an
eae es aes ace SRE SETAE
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
71 Press BAND while pressing SHIFT to select a
band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND io select a band. Then, press
> PRESET
repeatedly.
Each time PRESET
is pressed, the next ascending number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
MICLEAR, and press IISET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
BASIC OPERATIONS
Use Type I (normal) tapes only.
1 Press TAPE, then press Mi/4 to open the cassette
holder.
Deck 1
m/4
En
Insert a tape with the exposed side down. Push the cassette
Eo
holder to close.
2 Press > to start play.
Only the side facing out from the unit can be played back.
To stop play, press H/4.
To pause play, press El. To resume play, press again.
To fast forward or rewind, press <4
or ®P in stop mode.
Then press Mi/4 to stop the tape.
When both deck 1 and deck 2 are set in the playback
mode
Deck 2 is heard.
ENGLISH 8

Advertisement

Table of Contents
loading

Table of Contents