Setting The Timer Recording - Aiwa XR-H66MD Operating Instructions Manual

SETTING THE TIMER RECORDING
Timer recording is applicable for TUNER and VI DEO/AUX (with
an external timer) sources only.
You can specify the day of the week for timer recording, Up to
five settings can be stored.
To record from the radio using the timer, first preset the desired
station.
T
Numbered buttons
44, >
I
AUX/D-lN
P VOLUME
Use the remote control.
1
2
3
4
Press the TIMER button repeatedly until @ and
REC appear on the display, and press the II
button within 6 seconds.
The program number indication flashes.
Designate the program number (1 to 5) by
pressing the 4< or W button, and press the
1ti button.
REC
Q
Program number
Designate the day of the week by pressing the
- or FF button, and press the 11 button.
To activate timer recording every day, "EV" should be
displayed.
Designate the hour of the timer-on time by
pressing the - or * button, and press the
II button. Repeat to designate the minute of the
timer-on time.
6:30 A.M.
5
6
7
Press the - or FF button to select a source,
and press the I I button.
To record from radio,
"TU" should be displayed.
To record from equipment connected to the AUX jacks,
"AU" should be displayed.
To record from equipment connected to the DIGITAL
IN
iack,
"Din should be displayed,
When "TU" is selected, go to step 6.
When "AU" or "Di" is selected, skip to step 7.
Tune in the station to be recorded.
Press the ++ or E> button to select the band (FM or AM)
and press the 11 button. Press then the <+ or XF button
to select the preset number of the desired station, and press
the 11 button,
Preset number
To record a station not yet preset, select "PO." You can specify
the station later in step 9.
Designate the trav number of the MD used for
reco~ding (1 to 5i by pressing the + or ~
button, and press the 11 button.
Note that you can designate the tray number equal to the
program number specified in step 2, or "Ml ."
Example: If the program number is 3, you can designate either
".. 4,, ".. - ,,
8
9
Select the duration for the timer-activated period
with the + or EF button, and press the 11
button.
The duration for the timer-activated period can be set between
5 and 240 minutes in 5-minute steps.
Prepare the source.
To record from radio,
skip to step 10.
If you have selected "PO at step 6, tune in the desired station.
To record from the connected equipment,
prepare the
equipment for recording.
Set the timer of the connected equipment to the time when
play should start.
To record from equipment connected to the DIGITAL IN jack,
press the AUX/D-l N button repeatedly until "D-IN" is
displayed.
To record from equipment connected to the AUX jacks, press
the AUX/D-lN button repeatedly until "AUX is displayed.
33
ENGLISH