Wilo Control EC-WP Series Installation And Operating Instructions Manual page 55

Fig. 107: Menu 4.17
Fig. 108: Menu 4.18
Fig. 109: Menu 4.19
Fig. 110: Menu 4.22
Fig. 111: Menu 4.23
Fig. 112: Menu 4.24
Installation and operating instructions • Wilo-Control EC-WP • Ed.01/2024-08
Menu no. 4.17
Name Switching cycles of switchgear
Value range 0 – 65535
Description Number of starts and stops for the switchgear
Menu no. 4.18
Name Switching cycles of pump 1
Value range 0 – 65535
Description Number of starts and stops for pump 1
Menu no. 4.19
Name Switching cycles of pump 2
Value range 0 – 65535
Description Number of starts and stops for pump 2
Menu no. 4.22
Name Serial number switchgear
Description The serial number can be changed as long as the number of
switching cycles of the switchgear is less than or equal to 5.
After that, it can no longer be changed.
Menu no. 4.23
Name Switchgear type
Value range EC-bH
Factory setting EC-bH
Description Type of switchgear, for Control EC-WP always EC-bH (bore-
hole)
Menu no. 4.24
Name Software version
Description Version for the software used in the switchgear
en
55