Wilo Control EC-WP Series Installation And Operating Instructions Manual page 47

Fig. 80: Menu 5.70
Fig. 81: Menu 5.71
Fig. 82: Menu 5.72
Installation and operating instructions • Wilo-Control EC-WP • Ed.01/2024-08
Menu no. 5.70
Name Max. switching frequency per hour, per pump
Value range 0 ... 60
Factory setting 0
Description If the max. number of starts has been exceeded, an alarm is
generated. To deactivate the function, set the value "0".
Menu no. 5.71
Name Number of wells
Value range 1 ... 2
Factory setting 1
Description Number of wells for systems with 2 pumps. This has an effect
on dry-running detection and pump selection. For 1 pump, the
number is always 1.
Menu no. 5.72
Name Number of float switches for pump levels
Value range 1 – 4
Factory setting 1
Description The total number of float switches for controlling pump start
and pump stop. Setting options:
•
•
•
Systems with 1 pump: Number = 1 or 2
Systems with 2 pumps and 1 well: Number = 2, 3 or 4
Systems with 2 pumps and 2 wells: Number = 2 or 4
en
47