Universal Robots UR20 PolyScope X User Manual page 91

10. Cybersecurity Threat Assessment
10. Cybersecurity Threat Assessment
This section provides information to help you strengthen the robot against potential
cybersecurity threats. It outlines requirements for addressing cybersecurity threats and
Description
provides security hardening guidelines.
10.1. General Cybersecurity
Description Connecting a Universal Robots robot to a network can introduce cybersecurity risks.
These risks can be mitigated by using qualified personnel and implementing specific
measures for protecting the robot's cybersecurity.
Implementing cybersecurity measures requires conducting a cybersecurity threat
assessment.
The purpose is to:
10.2. Cybersecurity Requirements
Description Configuring your network and securing your robot requires you to implement the threat
measures for cybersecurity.
Follow all the requirements before you start configure your network, then verify the robot
setup is secure.
User Manual
•
Identify threats
•
Define trust zones and conduits
•
Specify the requirements of each component in the application
WARNING
Failure to conduct a cybersecurity risk assessment can place the robot
at risk.
• The integrator or competent, qualified personnel shall conduct a
cybersecurity risk assessment.
NOTICE
Only competent, qualified personnel shall be responsible for
determining the need for specific cybersecurity measures and for
providing the required cybersecurity measures.
91 UR20 PolyScope X