Flashforge Finder 2.0 User Manual page 60

Print When Slice Done: If you print via USB cable, you can check the box, while if
you print via USB, you should not check the box.
Machine Type: Flashforge Finder2.0
Supports: If you print a model with supports, you should click the inverted triangle
and select [Enable].
Raft: You are suggested to select [Enable]. Resolution:
You are suggested to select [Standard] More Options:
You are suggested to keep them default.
[OK]
Click to select the path to save the Gcode file. You can rename the file as you
like and save it as a .g or .gx file, click
Note: .gx files are available for preview while the .g files are not. They are displaying
as follows:
g. Files
Finder2.0 User Guide |
www.flashforge.com
[Save] to generate a Gcode file.
7-6
gx. Files
7-7
59
0086-0579-82273989