Flashforge Finder 2.0 User Manual page 56

temperature, click the
and filament unload. Furthermore, if you want to stop filament load and unload, you
can click [Stop].
● Temperature Control: Input the temperature you want to get in the left frame, click
[Apply], the printer will automatically heat the corresponding part, the right side
shows the current actual temperature of corresponding part. After starting heating, the
below curve of temperature form will start to change, different color correspond
different parts' temperatures
② Update Firmware
Every time when you start Flashprint, it will automatically detect and download the
up-to-date firmware. If any update is available, a dialog box will pop up for reminding
the users to update.
Step 1: Click [Tools]--[Update
updating firmware. If software and printer are already in connection, it reminds you
cutting off the connection, choose
Step 2: Choose corresponding printer type and firmware version and click
firmware updating box. After confirming the printer is in free state, the software will
automatically update the firmware
Finder2.0 User Guide |
www.flashforge.com
[Forward]/[Reverse]
firmware]. It needs to cut off connection before
[Yes] and go on to the next step.
6-24
55
rotation button to control filament load
0086-0579-82273989
[OK] in the