Flashforge Finder 2.0 User Manual page 57

Step 3 ： Reboot you Finder2.0 and wait for 4-5 seconds, then you can see the
update process bar. When the update finishes, it will go back to the main interface.
Step 4：Tap[Tools]--[About] to check] to check whether the updated version is right.
③ On Board Preferences
When the computer and printer are in connection, click
Preferences], you can check the printer name.
④ Machine information
When the computer and printer are in connection state, click
information], you can check the machine type, machine name and firmware etc.
6.2.15 Help Menus
① Help Contents：Click
② Check for Updates ： Click
updates online.
③ About FlashPrint ： Click
box will pop up. The contents include the current software version and copyright
information.
Finder2.0 User Guide |
www.flashforge.com
[Help]--[Help Contents], you can read the help contents.
[Help]--[Check for Update]
[Help]--[About
6-25
56
[Tools]--[On Board
[Tools]--[Machine
to detect the available
Flashprint], the software information
0086-0579-82273989