Flashforge Finder 2.0 User Manual page 62

transference, the printer will heat up automatically. And when heating finishes, the
printer will start to build the model.
If you want to print a Gcode from a local folder, you just need to load the file into
Flashprint at the status of USB connection or WIFI connection, then click the [Print]
button on the top-right.
● Load the target Gcode file into FlashPrint.
● Click the [Print] button, the PC will transfer the Gcode file to the printer.
Finder2.0 User Guide |
www.flashforge.com
7-9
7-10
61
0086-0579-82273989