Flashforge Finder 2.0 User Manual page 52

If successfully connected, you will see the following red mark.
②Connect Finder2.0 with your PC under STA mode
a. Turn on the WIFI of Finder2.0 and connect your PC with Finder2.0 via the
[ Tools ],
WIFI. Press
b."Finder2.0" continuous signal will be found available on the network list.
c. Once your PC is connected with your Finder2.0. Open the Internet browser and
enter "10.10.100.254" and enter the default
 You will enter the WIFI setting panel, it displays as follows:
Finder2.0 User Guide |
www.flashforge.com
6-19
[ Setting ], [ WIFI ], and
6-20
51
[ WIFI ON].
user name(admin) and password(admin).
0086-0579-82273989