Flashforge Finder 2.0 User Manual page 50

After selecting the model, you can make the model surface to platform via the
following operation.
[Edit]--[Surface to Platform]
Click
shown in the picture)
⑧Auto Layout All
[Edit]--[Auto Layout All]
Click
models will be placed automatically as automatic placement rule.
6.2.13 Print Menus
① Connect Machine
You can connect the Finder2.0 with your PC via a USB cable or WIFI.
Note: The machine icon on the bottom right displays the connection status:
Connected
Disconnected
Finder2.0 User Guide |
www.flashforge.com
into surface to platform mode(As
6-17
（Surface to Platform）
after loading one or more than one models, all
49
0086-0579-82273989