CyberData 011324 Operation Manual page 33

2.11 Audiofiles
The Audiofiles page is used to add custom audio to the board. User uploaded audio will take
precedence over the audio files shipped with the device.
This device supports stored messages. When stored messages are enabled, the user will hear
"Press 0 to page, press 1 to 9 to play stored message" when calling the device.
To configure stored messages, an audio file must be uploaded, using Choose File and Save. The
number of repeats can be specified or set to infinite (where the message plays until cancelled by the
# button during a phone call).
Operations Guide
Figure 2-16. Audiofiles Page (1 of 2)
932064A
Configure the Device
Point-to-Point Configuration
CyberData Corporation
35