CyberData 011324 Operation Manual page 17

1.1.8 Confirm Operation
After connecting the Paging Amplifier and Loudspeaker Amplifier to the 802.3af compliant ethernet
hub, use the LEDs on the Paging Amplifier and Loudspeaker Amplifier face to confirm that the
Paging Amplifier and Loudspeaker Amplifier is operational and linked to the network.
LED
Power (PWR)
Status
Link/Network Activity
(Link/Act.)
Link / Act.
Operations Guide
Table 1-3. Paging Amplifier and Loudspeaker Amplifier LEDs
Color
BLUE/GREEN
GREEN
GREEN
Figure 1-13. Paging Amplifier and Loudspeaker Amplifier LEDs
Link/Network Activity (Link/Act.) LED
(GREEN)
Installing the Paging Amplifier and Loudspeaker Amplifier
Function
The power LED is GREEN
BLUE during high power mode (
blink during a boot up or a phone call.
After supplying power to the device, a steady
illuminates.
After about 20 seconds the
indicate that the board is fully booted.
The status LED will blink during a page when it is online.
The Link/Network Activity (Link/Act.)
indicate network traffic.
Power (Pwr) LED
(BLUE/GREEN)
Power
932064A
Confirm Operation
in low power mode ( 802.3af) and a
802.3at) .
The power LED will
GREEN
GREEN
Status LED will blink twice to
GREEN
LED blinks to
Status
Status LED
(GREEN)
CyberData Corporation
19
Status LED