CyberData 011324 Operation Manual page 19

2 Configure the Device
2.2 Log In Page
1. Open your browser to the device IP address.
Note
Note
Note
Note
2. On the Log In Page
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 192.168.1.23.
Make sure that the PC is on the same IP network as the Paging Amplifier and Loudspeaker
Amplifier.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products. 

CyberData's VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The Intercom ships in DHCP mode. To get to the Home page, use the discovery utility to
scan for the device on the network and open your browser from there.
(Figure
Access Password to access the Home Page
Web Access Username: admin
Web Access Password: admin
Figure 2-14. Log In Page
2-14), use the following default Web Access Username and Web
(Figure
932064A
2-2):
CyberData Corporation
21