Table of Contents
Advertisement
Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-
only information here relates to your DHCP status. The DHCP table shows current DHCP client
information (including MAC Address, and IP Address) of all network clients using the EMG3425-
Q10A's DHCP server.
Figure 21 Monitor > DHCP Table
The following table describes the labels in this screen.
Table 11 Monitor > DHCP Table
LABEL
#
Status
Host Name
IP Address
MAC Address
Reserve
Apply
Cancel
7.5 Packet Statistics
Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status
screen. Read-only information here includes port status, packet specific statistics and the "system
up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.
Chapter 7 Monitor
DESCRIPTION
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or
down (a gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Select this if you want to reserve the IP address for this specific MAC address.
Click Apply to save your changes back to the EMG3425-Q10A.
Click Cancel to reload the previous configuration for this screen.
EMG3425-Q10A User's Guide
53
Advertisement
Table of Contents
