Navigation Panel; Lan Screen - ZyXEL Communications MWR211 - V1.0 Manual

6.4.1 Navigation Panel

Use the menu in the navigation panel to configure MWR211 features in Access
Point mode.
The following screen and table show the features you can configure in Access
Point mode.
Figure 34 Menu: Access Point Mode
Refer to Table 20 Navigation Panel: Router Mod for descriptions of the labels
shown in the Navigation panel.

6.5 LAN Screen

Use this section to configure your LAN settings while in Access Point mode.
Click Network > LAN to see the screen below.
Note: If you change the IP address of the MWR211 in the screen below, you will
need to log into the MWR211 again using the new IP address.
MWR211 User's Guide
51