ZyXEL Communications MWR211 - V1.0 Manual page 111

Table 44 Network > WAN > Wired WAN: PPTP Encapsulation
LABEL
ISP Parameters for Internet Access
Connection Type
User Name
Password
Retype to Confirm
Nailed-up
Connection
Idle Timeout
PPTP Configuration
Server IP Address
Get automatically
from ISP
Use Fixed IP
Address
IP Address
IP Subnet Mask
Gateway IP
Address
MWR211 User's Guide
DESCRIPTION
To configure a PPTP client, you must configure the User Name
and Password fields for a PPP connection and the PPTP
parameters for a PPTP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is
correctly.
Select Nailed-Up Connection if you do not want the connection
to time out.
This value specifies the time in minutes that elapses before the
MWR211 automatically disconnects from the PPTP server.
Type the IP address of the PPTP server.
Select this option If your ISP did not assign you a fixed IP address.
This is the default selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed
IP Address.
Your MWR211 will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the MWR211.
Enter a Gateway IP Address (if your ISP gave you one) in this
field.
111