ZyXEL Communications MWR211 - V1.0 Manual page 176

Table 69 Management > Remote Management > SNMP
LABEL DESCRIPTION
Select the Enable SNMP check box to enable the SNMP functions.
Enable SNMP
Select the SNMP Version used by your management utility. Currently
SNMP Version
MWR211 only supports v1.
Enter the Community name used by your SNMP devices and programs.
Get / Set
Devices not in the same Community will not be able to communicate
Community
with each other.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
MWR211 User's Guide
176