ZyXEL Communications MWR211 - V1.0 Manual page 258

Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
Click the Red Hat button (located on the bottom left corner), select
1
System Setting and click Network.
Figure 161 Red Hat 9.0: KDE: Network Configuration: Devices
Double-click on the profile of the network card you wish to configure.
2
The Ethernet Device General screen displays as shown.
Figure 162 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address click Automatically obtain IP address
settings with and select dhcp from the drop down list.
• If you have a static IP address click Statically set IP Addresses and fill in
the Address, Subnet mask, and Default Gateway Address fields.
MWR211 User's Guide
258