Advanced Screen - ZyXEL Communications MWR211 - V1.0 Manual

Table 63 Management > Bandwidth Management > General
LABEL
Enable
Bandwidth
Management
Apply
Reset
20.5

Advanced Screen

Use this screen to configure bandwidth management rules for the pre-defined
services or applications.
You can also use this screen to configure bandwidth management rule for other
services or applications that are not on the pre-defined list of MWR211.
Additionally, you can define the source and destination IP addresses and port for
a service or application.
Note: The two tables shown in this screen can be configured and applied at the same
time.
Click Management > Bandwidth Management > Advanced to open the
bandwidth management Advanced screen.
MWR211 User's Guide
DESCRIPTION
This field allows you to have MWR211 apply bandwidth management.
Enable bandwidth management to give traffic that matches a
bandwidth rule priority over traffic that does not match a bandwidth
rule.
Enabling bandwidth management also allows you to control the
maximum or minimum amounts of bandwidth that can be used by
traffic that matches a bandwidth rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
165