ZyXEL Communications MWR211 - V1.0 Manual page 95

The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click
PIN Number
Generate to generate a new PIN number.
Status
This displays Configured when the MWR211 has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
Status
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the MWR211 or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is only available when the WPS status displays
Configured.
Release
Configuration
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the MWR211.
This is the 802.11 mode used. Only compliant WLAN devices can
802.11 Mode
associate with the MWR211.
SSID This is the name of the wireless network.
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the MWR211.
Refresh Click Refresh to get this screen information afresh.
MWR211 User's Guide
95