Advanced Screen - ZyXEL Communications MWR211 - V1.0 Manual

The following table describes the labels in this screen.
Table 51 Network > DHCP Server > General
LABEL
Enable DHCP
Server
IP Pool Starting
Address
Pool Size
Apply
Reset
12.4

Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses. You can also use this screen to
configure the DNS server information that the MWR211 sends to the DHCP
clients.
To change your MWR211's static DHCP settings, click Network > DHCP Server
> Advanced. The following screen displays.
MWR211 User's Guide
DESCRIPTION
Enable or Disable DHCP for LAN.
This field specifies the first of the contiguous addresses in the IP
address pool for LAN.
This field specifies the size, or count of the IP address pool for LAN.
Click Apply to save your changes back to the MWR211.
Click Reset to begin configuring this screen afresh.
131