Resetting The Mwr211; Procedure To Use The Reset Button - ZyXEL Communications MWR211 - V1.0 Manual

Figure 4 Change Password Screen
The following table describes the labels in this screen.
Table 3 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Retype to Retype the password for confirmation.
Confirm
Apply Click Apply to save your changes to the MWR211.
Ignore Click Ignore if you do not want to change the password this
time.
Note: The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes; go to
24 to change this). Simply log back into the MWR211 if this happens.

2.3 Resetting the MWR211

If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the MWR211
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to
"1234" and the IP address will be reset to "192.168.10.1".

2.3.1 Procedure to Use the Reset Button

1 Make sure the power LED is on.
MWR211 User's Guide
24
Chapter