ZyXEL Communications MWR211 - V1.0 Manual page 129

Figure 81 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 50 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias Check this to enable IP alias.
Type the IP alias address of your MWR211 in dotted decimal notation.
IP Address
The subnet mask specifies the network number portion of an IP
address. Your MWR211 will automatically calculate the subnet mask
IP Subnet Mask based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by the
MWR211.
Apply Click Apply to save your changes back to the MWR211.
Reset Click Reset to begin configuring this screen afresh.
MWR211 User's Guide
129